Bedienungsanleitung Pioneer XDJ-AERO (Seite 20 von 37) (Englisch)

491973

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Mixer section

AUTO MIX

CROSS F.

CURVE

LOW

PHONO1/

DECK1

HEADPHONES

MASTER

LEVEL

MASTER

MIXING

TRIM

MID

LOW

FILTER

LEVEL

CUE

MASTER

LINE1

CH1

TRIM

MID

LOW

FILTER

CH2

THRU

CH2

PHONO2/

DECK2

MIC

LEVEL

LINE2

ON/OFF

MIC

1 3

f e

2 23 7

1 DECK1/PHONO1/LINE1 selector switch

This selects the [CH 1] input source from among the devices con-

nected to this unit.

! When set to [PHONO/LINE], the mixer section can be used as a

DJ mixer. In this case, the effect sections of the respective decks

can be used.

2 EQ (HI, MID, LOW) controls

These adjust the sound quality of the respective channels.

These adjust the [HI] (high range), [MID] (middle range) and [LOW]

(low range), respectively.

3 TRIM control

Adjusts the level of audio signals input in each channel.

4 LEVEL indicator

This displays the audio levels of the respective channels.

! Press the [MASTER] button to switch the channel whose audio

level is displayed.

5 MASTER LEVEL control

Adjusts the audio level output from the [MASTER OUT 1] and

[MASTER OUT 2] terminals.

6 MASTER button

This switches the channel indicated on the [LEVEL] indicator.

— When off: The audio level input to [CH 1] (channel 1) and [CH 2]

(channel 2) is displayed on the [LEVEL] indicator.

— When lit: The audio level output from the [MASTER OUT 1] and

[MASTER OUT 2] terminals is displayed on the [LEVEL] indicator.

7 DECK2/PHONO2/LINE2 selector switch

This selects the [CH 2] input source from among the devices con-

nected to this unit.

! When set to [PHONO/LINE], the mixer section can be used as a

DJ mixer. In this case, the effect sections of the respective decks

can be used.

8 MIC LEVEL control

Adjusts the audio level input to the [MIC] terminal.

! Use the [MIC ATT.] control on this unit’s rear panel to adjust the

audio level before DJ performances.

9 MIC EQ control

This adjusts the microphone’s sound quality.

a MIC (ON/OFF) button

Turns the microphone on/off.

b FILTER control

— Turn clockwise to apply the high pass filter.

— Turn counterclockwise to apply the low pass filter.

= Using the filter function (p.21)

c AUTO MIX button

This turns the auto mix function on and off.

= Using the auto mix function (p.25)

d Channel fader

Adjusts the level of audio signals output in each channel.

e CROSS F. CURVE (THRU, , ) (crossfader curve

selector switch)

This switches the crossfader curve characteristics.

f Crossfader

The sound of the respective channels is output according to the

curve characteristics selected with the [THRU, , ] selector

switch.

g (CH2) button

The sound of [CH 2] is monitored.

h (CH1) button

The sound of [CH 1] is monitored.

i HEADPHONES LEVEL control

Adjusts the audio level output from the [PHONES] terminal.

j HEADPHONES MIXING control

Adjusts the balance of the monitor volume between the sound of the

deck whose [

] button is pressed and the master sound.

Adjusting the sound quality

Turn the [HI], [MID], [LOW] controls for the respective

channels.

! The sound for that range can be turned completely off by turning the

control all the way counterclockwise (isolator function).

Monitoring sound with headphones

1 Connect headphones to the [PHONES] terminal.

For instructions on connections, see Connecting the input/output termi-

nals on page 10.

2 Press the [ (CH1)] or [ (CH2)] button.

Select the channel you want to monitor.

! This operation is not necessary to monitor the sound output from the

[MASTER OUT 1] and [MASTER OUT 2] terminals (the sound of the

master channel).

3 Turn the [HEADPHONES MIXING] control.

— When turned counterclockwise: The volume of [CH 1] and [CH 2]

becomes relatively louder.

— At the center position: The volume of the [CH 1] and [CH 2]

sound is the same as the volume of the sound output from the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer XDJ-AERO Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer XDJ-AERO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info