Bedienungsanleitung Pioneer XDJ-AERO (Seite 28 von 37) (Englisch)

491973

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

List of WLAN SETTING items

When [MODE] at [WLAN SETTING] is set to [OFF], only [MODE] and [RESET TO DEFAULT] are displayed.

Setting item 1 Setting item 2 Setting ranges Description

MODE

—

OFF/ACCESS POINT(AP)*/

WLAN CLIENT

Used to set this unit’s operation mode.

INPUT WPS PINCODE

— 0 to 9 (max. 8 characters)

When in the access point mode, input the PIN code of the sub unit

to be connected to this unit here to authorize connection.

NETWORK SETTING

SSID

A to Z, a to z, 0 to 9, symbols

(max. 32 characters)

Used to set this unit’s [SSID].

SECURITY

OPEN / WPA / WPA2 Used to set this unit’s security (encryption) type.

PASSWORD

A to Z, a to z, 0 to 9, symbols

(max. 64 characters)

Used to set this unit’s password.

OTHERS

IP ADDRESS

Sets this unit’s IP address.

SUBNET MASK

Sets this unit’s subnet mask.

CHANNEL NO.

CH1 to AUTO*

This unit uses the 2.4 GHz band. If there is a wireless LAN network

on the same band in the area and the waves cause interference,

making connections and communications instable, try changing

the channel manually. (By default, this is set to [AUTO] and a

relatively free channel is selected automatically.)

DHCP SERVER

ENABLE*/DISABLE

Used to set whether or not to enable this unit’s DHCP server

function.

[ENABLE]: Enables the DHCP server function.

[DISABLE]: Disables the DHCP server function.

CHANNEL WIDTH

20 MHz*/40 MHz

Used to set the frequency band’s width.

Only set [40 MHz] when communications are possible by

IEEE802.11n. Otherwise leave this at [20 MHz].

KEY RENEWAL INTERVAL

0minute to 60minute* to

1440minute

When [WPA] or [WPA2] is set at [SECURITY] under [NETWORK

SETTING], the encryption key’s renewal interval can be set.

When this setting is made, the encryption key is renewed automati-

cally at specific intervals, maintaining a more secure status.

RESET TO DEFAULT

— YES/NO* Resets the settings at [WLAN SETTING] to the factory defaults.

SELECT SSID

—

Method of selection + input

method

A maximum of 50 receivable networks (SSIDs) in the surrounding

area are displayed. Use [OTHER] at the very bottom to specify an

[SSID] that is not displayed.

DHCP CLIENT

— ENABLE*/DISABLE

Used to select whether to acquire the network settings automati-

cally using the DHCP function on the connected network side or to

set them manually.

[ENABLE]: Acquire the IP address, subnet mask, etc., automatically.

[DISABLE]: Input the IP address, subnet mask, etc., manually.

IP ADDRESS/SUBNET MASK

—

000:000:000:000 to

255:255:255:255

(Set to 192:168:1:1/255:255:255:0

upon purchase.)

When in the access point mode, the fixed values below are set.

IP address: 192.168.1.1

Subnet mask: 255.255.255.0

When [DHCP CLIENT] is set to [DISABLE], the values must be input

manually.

*: Setting upon purchase

1 Not displayed in the WLAN client mode.

2 Items marked “**” are not displayed in the access point (AP) mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer XDJ-AERO Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer XDJ-AERO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info