__________________________________________7_________________________________________
On the top of the screen, the current path is displayed. Because the Dealer4+ Internal Memory does not
support subdirectories only the drive symbol (D4M:) is shown. Below is the file list area. Seven files are
shown on the screen. If there are more files in the memory, the file list can be scrolled through using the
Up and Down buttons. These buttons are also used to select a particular file. A File can also be selected
by directly pressing on it.
The Up and Down buttons have the ability to be "held down" - they can be pressed continuously for fast
scrolling, This is especially useful when a large number of files exists in the memory.
The Action buttons at the bottom of the screen have the following functions:
• Open button - load selected file into Dealer4+ for dealing.
• Directory Up button - return to the top level of Load Screen.
• File Delete button - delete selected file from Dealer4+ Internal Memory
• Cancel Button - return to Main Screen without loading.
When a file is correctly loaded, the Dealer4+ returns to the Main Screen:
Board numbers and file name are shown now on the screen and indicate that a Boardset is loaded.
Information fields (Even name, Event Site and Event date) are only filled if this information exists in the
loaded file. The Deal button is now active so it is possible to deal -see chapter 3.3 for more information.
The current version of Display Firmware - ver 2.10 supports PBN, BRI and DUP bridge files types. Other
types will be added in the next version of the Display Firmware
If any errors happen during Boardset loading, it will be displayed on the screen. The most common error
is when an incorrect file (not bridge file) is selected to be loaded:
