Bedienungsanleitung Polar PROTRAINER XT (Seite 15 von 29) (Englisch)

542820

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

28 29

WHL1 2000 is displayed.

1 (alternatively 2) is flashing.

1. Press SIGNAL/LIGHT to select the wheel

1 or wheel 2 according to your bike.

2. Press STORE/LAP/RECOVERY to lock

your selection.

Thousands of millimetres is flashing.

3. Press SIGNAL/LIGHT to set the thousands

of millimetres of the wheel size.

4. Press STORE/LAP/RECOVERY to lock your

selection.

The hundreds of millimetres start flashing.

5. Press SIGNAL/LIGHT to set the hundreds of millimetres.

6. Press STORE/LAP/RECOVERY to lock your selection.

The tens of millimetres start flashing.

7. Press SIGNAL/LIGHT to set the tens of millimetres.

8. Press STORE/LAP/RECOVERY to lock your selection.

The millimetres start flashing.

9. Press SIGNAL/LIGHT to set the millimetres.

10.Press STORE/LAP/RECOVERY to lock your selection.

You can swap the wheelsizes (WHL 1 / WHL 2) at the beginning of

the measurement in the cycling mode by pressing and holding the

SELECT button until the wheelsize is swapped. Please note that you

can swap the wheelsize only before starting the stopwatch.

You have the following two alternatives to continue:

1. To start setting the odometer press SET/START/STOP.

The second block of the graphic bar is flashing.

ODO is displayed.

The first digit of the odometer reading is flashing.

Continue from Setting the odometer.

2. To return to the Time of day display, press SELECT twice.

1. CALIBRATING THE WHEEL SIZE

You must calibrate the wheel size of your bike before you can use

your Polar Protrainer XT Heart Rate Monitor to measure distance and

speed. The wheel size must be set

in millimetres

Polar Protrainer XT allows you to set in two wheel sizes (WHL1 /

WHL2). Use this function if you have two bikes. The wheel size which

is displayed when you leave the wheel size setting mode, will be

used next time you start exercising.

TO FIND OUT THE WHEEL SIZE OF YOUR BIKE YOU HAVE

THE FOLLOWING ALTERNATIVES:

METHOD 1. The quick way.

Check the wheel diameter (in inches) which is printed on the front bike

wheel. On the chart below, find your wheel diameter in inches on the left

and match it with the wheel size in millimetres on the right.

WHEEL DIAMETER WHEEL SIZE SETTING

(inches) (mm)

26.0 2080

27.0 (700*32C) 2155

28.0 (700B) 2237

METHOD 2.

Measure the circumference of the wheel by stretching

a tape measure around the outside of the wheel.

If you measure in inches, convert the value to millimetres

by multiplying the number of inches by 25.4 mm. mm

Subtract 4 mm to account for your weight on the bike. - 4 mm

The four digit value for the wheel size is mm

METHOD 3. The most accurate way.

For this method ask your friend to assist you. First, mark the tread of your

front tire with a line. Match this line with a line drawn on the ground. Sit on

your bike and have your friend walk you forward for one complete wheel

rotation. Draw another line on the ground exactly where the mark on the tire

touches the ground. Measure the distance between the two lines on the

ground to get your wheel circumference. If you measure in inches, convert

to millimetres by multiplying the number of inches by 25.4 mm.

PROXT GBR/E 7.2.2001, 09:0128-29

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polar PROTRAINER XT Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info