Bedienungsanleitung Polar RCX 3 (Seite 28 von 57) (Englisch)

520075

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

8. SETTINGS

Sport Profile Settings

There are four different sport profiles set on as default in the Polar RCX3 training computer.

To modify sport profile settings select MENU > Settings > Sport profiles.

Running Settings

To view or modify sport profile settings for running select MENU > Settings > Sport profiles > Running

• Training sounds: Select Off, Soft, Loud or Very loud.

• Heart rate sensor : Select On, Off or Search new.

• GPS sensor: Select On, Off or Search new.

• Stride sensor: Select On, Off or Search new.

• Stride sensor calibration: Select Calibrate > By running or Set factor. For more information on

calibration, see Calibrate the Polar s3+ Stride Sensor (page 10).

Stride sensor calibration is visible only if the stride sensor has been set On previously.

• Speed View: Select Kilometers per hour or Minutes per kilometer or if you have chosen imperial units

select Miles per hour or Minutes per mile.

• Automatic lap: Select On or Off. If you set the automatic lap On, Set automatic lap distance is displayed.

Set the distance in kilometers or miles.

• Show in pre-training mode? Select YES, Sport shown in pre-training mode is displayed. The sport will be

visible in the list of sports in pre-training mode, when you press OK in Time mode. Select No, Sport not

shown in pre-training mode is displayed.

• Training view numbering : Select On or Off. If you set the Training view numbering On , the number of the

training view appears for a few seconds when you browse the training views with UP/DOWN.

• Training view: Select 3 rows or 2 rows. The training information will be displayed on three or two rows

according to your selection.

All the new sensors must be paired with the training computer before they can be activated.

For more information on pairing a new sensor with the training computer see Using a New Accessory

(page 38).

Cycling Settings

To view or modify sport profile settings for cycling select MENU > Settings > Sport profiles > Cycling

(Bike1)/Cycling2 (Bike 2)

• Training sounds: Select Off, Soft, Loud or Very loud.

• Heart rate sensor : Select On, Off or Search new.

• GPS sensor: Select On , Off or Search new.

• Bike 1 settings For more information, see Bike Settings.

• Speed View: Select Kilometers per hour or Minutes per kilometer . If you have chosen imperial units

select Miles per hour or Minutes per mile.

• Automatic lap is set off as default. Press OK, Set distance is displayed. Set the distance in kilometers or

in miles and confirm with OK. Automatic lap set to x.x km is displayed. After this you can select to have

the Automatic lap Off or On.

• Show in pre-training mode? Select YES, Sport shown in pre-training mode is displayed. The sport will be

visible in the list of sports in pre-training mode, when you press OK in Time mode. Select No, Sport not

shown in pre-training mode is displayed.

ENGLISH

28 Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polar RCX 3 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polar RCX 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info