Bedienungsanleitung Polar RS800CX (Seite 21 von 68) (Englisch)

464066

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

• Speed view: Select km/h or min/km.

• Calibrate: Calibrate stride sensor* (not displayed if stride sensor is off).

• Seek sensor: Searches for heart rate sensor or sensor data, if the signal disappears during exercise due to

interference.

• A.Lap*: Activate/deactivate automatic lap.

Once you have changed the settings, the training computer will return to exercise mode.

Pause Exercise

Pause exercise recording by pressing STOP.

In pause mode you can:

• Continue: Continue exercise recording.

• Exit: Stop exercise recording (or press STOP).

• Summary: View a summary of the exercise so far. The following summary information is displayed:

calories, distance*, exercise time, maximum heart rate, minimum heart rate, average heart rate, maximum

speed/pace*, average speed/pace*, ascent and altitude.

• Combine: Combine your current exercise with the previous exercise file.

• Settings: Change or view different settings.

• Reset: Delete recorded exercise information. Confirm with OK and press OK again to restart recording.

• Reset trip: Reset a trip distance. Confirm with OK and press OK again to restart recording.

• Location**: Check your current location. The training computer presents the location with the latest GPS

coordinate data. Latitude and longitude are expressed in degrees and minutes. Number of visible satellites

visible on lowest row.

• Free mode: Change your exercise profile to free exercise mode. This does not delete the exercise you have

performed, but will continue the exercise without settings. Restart the original exercise by pausing the

session, and choosing Restart P1.

**Optional G3/G5 GPS sensor W.I.N.D. required.

Determine Your OwnZone

For background information on Polar OwnZone®, see OwnZone Training (page 54).

Find your OwnZone in 1-5 minutes during a warm-up period by walking and jogging. You should start

exercising gently at a light intensity and gradually increase intensity to raise your heart rate.

Redefine your OwnZone:

• When changing exercise environment or exercise mode.

• When taking up exercise after more than a week’s break.

• If you are not 100 percent sure of your physical or mental state – for example, if you are not recovered

from previous training, not feeling well, or are stressed.

• After changing user settings.

Before you start to determine your OwnZone, make sure that:

• Your user settings are correct.

• You select the OwnZone exercise. Every time you start the OwnZone exercise, the training computer will

automatically determine your OwnZone.

1. Wear the heart rate sensor and stride sensor* as instructed. Start measurement by pressing OK twice.

2. When your exercise starts, OZ is displayed and OwnZone determination begins.

Determination of your OwnZone happens in five stages. After each stage, you will hear a beep (if the

sound settings are on) indicating the end of the stage.

OZ > Walk at a slow pace for 1 min. Keep your heart rate below 100 bpm / 50% HR

max

during this first

stage.

OZ >> Walk at a normal pace for 1 min. Slowly increase your heart rate by 10-20 bpm / 5% HR

max

ENGLISH

Training 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polar RS800CX Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polar RS800CX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info