Bedienungsanleitung Polaroid 600 autofocus (Seite 8 von 19) (Englisch)

294948

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

600/600 SE Camera User Guide

How to pull the tabs

After making the exposure, pull the white tab

straight, all the way out of the camera. A large

yellow tab will appear (40). Grip the yellow

tab firmly. Pull it straight out of the camera at

moderate speed, without hesitation (41). The

picture is now developing, so start timing.

Develop the picture for the full time

recommended in the film instructions inside

the fim box. Separate the print from the

negative in one continuous motion, starting at

the end nearest the yellow tab (42).

Information on handling of prints and

negatives is in the film instructions.

Electronic flash (Picture 43)

An electronic flash unit can be mounted on

the accessory shoe on top of the camera

(43A). The Model 600 SE has an additional

accessory shoe on top of the handgrip (43B)

that can be used for mounting the flash unit

using the 75mm lens and viewfinder.

If you use a large handle-type flash, a special

bracket may be available for your unit that

attaches to the flash mount on the side of the

camera (44). If you use the bracket that

comes with your unit, be sure it does not

obstruct the film holder and its operation.

Consult your photo dealer for further

information.

Plug the connector cord from the electronic

flash unit into the PC connector socket on the

lens (45). The shutter is X synchronized for

electronic flash at all speeds. Consult the

instructions provided with the flash unit for

proper lens aperture settings.

There may be noticeable differences in the

color quality of the light from various makes

of electronic flash units. If your flash produces

displeasing colors with Polaroid film, the

problem can usually be corrected by suitable

filtration on the camera lens or the flash unit.

Automatic flash units and color film

It is recommended that you keep an

automatic flash unit set for “manual”

operation when using color film.

When set for “automatic” operation, exposure

is controlled by the duration of the flash.

When your subject is close, the flash duration

may be considerably shorter than 1/1,000

sec. The resulting reciprocity effects tend to

cause a color shift towards the warmer

colors. If necessary, this can be corrected

with weak cyan or blue and cyan CC filtration.

Maintenance

Lens care

The lens supplied with the Models 600 and

600 SE is a high quality, professional lens

that should be kept clean and handled with

extreme care. If it should become dirty, blow

off any dust, then wipe gently with a clean,

lint-free cloth. Fingerprints should be cleaned

off immediately with a drop of lens cleaning

fluid and lens tissue. Never use silicone-

coated eyeglass tissue to clean the lens.

Keep the developer rollers clean

It is extremely important to keep the rollers

clean at all times. Dirt or developer

chemicals on the rollers will leave marks on

the picture and may even cause the picture to

jam in the rollers.

To clean the rollers: With both hands, lift

the steel loops, and remove the roller

assembly (46). Clean both rollers with a

damp, lint-free cloth (47). Never scrape them

with anything metallic, nor with your fingernail.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polaroid 600 autofocus Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info