27
Press and hold MEM key for 3 seconds. The Stored icon will appear,
indicating that the current channel has been saved into memory.
Any channel scan number can be saved as memory channels.
To delete channels from memory:
During normal operating mode, use UP/DOWN key to select the
saved channel you wish to delete.
Press and hold MEM key for 3 seconds. The selected channel will
be deleted from memory.
9. SCANNING
Your radio comes with three scan options:
Normal Scan: if there are no channels in memory, the default is
Normal Scan. In Normal Scan mode, all channels in the channel set
are scanned in sequence. After the last channel number has been
scanned, the cycle repeats.
Normal scan will automatically check for transmission on the channel
is being scanned.
If a signal is received, the scan stops on the channel as long as it
present and the “SCAN” icon is ashing will appear on the LCD dis-
play. If the signal is lost for ve seconds or more, the radio resumes
scanning.
Memory Scan: in Memory Scan mode, only the channels that have
been saved in memory are scanned in sequence. After the last saved
channel number has been scanned, the cycle repeats.
Priority Scan: in Priority Scan mode, you can scan all channels
while alternately scanning Channel 16 to make sure that you don’t
miss distress or emergency calls.
To activate scan modes:
Press SCAN key once when no channels are stored in memory to
activate the Normal scan function. The Scan icon will appear on
the LCD display. Or...
Press SCAN key once when there is at least one channel in memory
to activate the Memory Scan function. The Stored and Scan icons
will appear on the LCD display. or...
Press and hold SCAN key for 3 seconds to enter Priority Scan mode.
The Priority Scan “P” icon will appear on the LCD display just be-
fore “SCAN” icon.
2.
1.
2.
1.
2.
3.
