Bedienungsanleitung Polti LECOLOGICO AS 806 (Seite 8 von 10) (Englisch)

649056

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

LECOLOGICO AS 805 - AS 806 SPECIAL PETS

Periodically clean the mini turbo brush as follows:

• Slacken the screws on the base of the tool

(fig.21).

• Separate the two parts that make up the brush

(fig.22).

•Vac up dirt inside the brush with the tube with no

tool on it (fig.23).

• Close the brush again, performing these opera-

tions in reverse order (fig.24).

Turbo Brush (O) (Optional mod. AS805)

The turbo brush is designed for perfect cleaning of

carpets with a maximum pile length up to 15 mm.

The rotating brush effortlessly picks up threads,

hair, animal hair and other particles which are nor-

mally particularly difficult to vacuum up. The turbo

brush may successfully be used on hard surfaces

too.

On the front of the turbo brush you can see a slide

for adjustment to every type of carpet: for low pile

carpets or hard floors, move the cursor to the left

(O2) (fig. A), for long pile carpets move it to the

right (fig. B). Move the turbo brush slowly forward

and backward over the carpet, on fringes or near

corners move it in the direction of the arrow (fig. C).

Cleaning

It may happen that the turbo brush decreases its

rotation speed while in use, becoming less effec-

tive. This may be caused by clogged hairs and

threads around the brush or because the turbine

becomes blocked. If this happens, then proceed

with the following cleaning operation:

Cleaning the rotating brush: insert the points of

a pair of scissors into the brush roller slots (fig. D).

Move the scissors to catch the threads or hairs,

then cut them and remove them manually or using

a small-sized pair of pliers.

Cleaning the turbine: unscrew the four screws

(O3) on the bottom side (fig. E). Turn the turbo brush

over and remove the cover (fig. F). Clean the turbine

and the other parts (fig. G). Reassemble the parts re-

peating this operation in reverse order. Make sure

that the two sections fit together properly.

Fig. A

Fig. F

Fig. G

Fig. B

Fig. C Fig. D

Fig. E

Before putting the vacuum cleaner away, rewind the

power cable by pressing the button (2), as shown in

fig.9, being careful to accompany it during winding.

Always make sure the appliance is unplugged be-

fore performing maintenance work of any kind.

((

))

• Pull the nozzle (17c) until it comes off the filter

cage. Separate the body of the cage (17a)

from the filter cover (17).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti LECOLOGICO AS 806 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti LECOLOGICO AS 806

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info