Bedienungsanleitung Polti MONDIAL VAP 5000 (Seite 10 von 19) (Englisch)

648839

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

To clean very encrusted surfaces, you can use super steam: by pushing the switch (7), the steam

will go from 500 KpA to 700 KpA, obtaining much higher cleaning power. If you are using

Mondialvap 5000 at 500 KpA and you want to change to 700 KpA, it will be necessary to stop

the steam output for a few minutes so that to allow the pressure in the generator to settle.

The suction power control knob (9) allows to vary the suction power according to the surfaces to

be cleaned. By turning the knob anti-clockwise, the suction power will increase.

MONDIALVAP 5000 is equipped with a handy and precise visual pressure level gauge (6).

The materials the appliance is made of are of excellent quality and suitable to support mechanical

and thermic stress without changing their physical characteristics. Different intervention levels of

the devices help to further enhance the safety level of the appliance.

Move the connector button (73) on the accessory to the “open” position. Attach the required tool

to the hand gun. Move the connector button (73) back to the position “closed”. Check that the

connector button has engaged and the accessory is fully connected.

The machine has 4 pivoting wheels. The rear wheels have a brake so

that the machine can be stopped even on sloping surfaces. To insert

the brake, push the STOP lever with your foot (fig.11). To unlock it,

lift the same lever.

- For cleaning leather, wood or delicate fabrics especially dralon, velvet and other pile surfaces,

consult the manufacturers instructions. Clean only by using the hand gun at a safe distance

together with a soft cloth and always do a test on a non visible part of the item first or on a

sample. Allow the test area to dry completely before observing results and effects on surface

or colour before proceeding to clean further areas, ensuring that exactly the same distance and

technique are applied as for the test area.

- For cleaning wood surfaces (furniture, doors, etc.) take great care as too long an application of

the steam could alter the waxed appearance, the shine or the colour of the surfaces cleaned.

We therefore recommend you apply the steam on such surfaces only for brief periods or to clean

these surfaces using a cloth first held in the steam.

- On delicate surfaces (e.g. synthetic materials, lacquered surfaces etc.) we recommend that the

small brush should always be covered with a cloth (15).

- If cleaning glass surfaces in particularly low temperatures preheat the glass using the hand gun

(35b) from about 50 centimetres distance from the surface to be cleaned.

- For the care of your plants vaporise at a minimum distance of 50 centimetres.

Fig. 11

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti MONDIAL VAP 5000 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info