Bedienungsanleitung Polti UNICO MCV70 (Seite 13 von 20) (Englisch)

649053

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

adjust the strength of the steam using the +/- buttons (to turn

off the boiler hold the OFF button for a few seconds); for this

type of surface, use the minimum steam level. The steam

indicator light will start ﬂashing and continue until the correct

temperature has been reached.

3.4 Deactivate the steam lock and continue with the steam

delivery and suction, pressing the steam trigger on the handle,

and the suction button, respectively. The cloth will remove the

dirt thanks to its abrasive action and will sanitise the surface.

3.5 Alternatively, for better results and to avoid over-wetting

the surface, select program 2, pressing the PROGRAM button

(see Chapter 5).

4. CLEANING RUGS AND CARPETS

4.1 For suction alone, set the innovative universal brush to

position A (no insert), pressing the pedal.

4.2 Press the suction button on the appliance and proceed with

cleaning. It is possible to adjust the suction power by moving

the cursor on the handle.

4.3 For steam cleaning and suction, ensure that points 1.5 and

1.6 have been carried out. Turn the boiler on using the ON

button and adjust the strength of the steam using the +/-

buttons (to turn off the boiler hold the OFF button for a few

seconds); for this type of surface we recommend the medium

steam level. The steam indicator light will start ﬂashing and

continue until the correct temperature is reached.

4.4 Deactivate the steam lock and continue with the steam

delivery and suction, pressing the steam trigger on the handle,

and the suction button, respectively.

4.5 It is possible to use the suction and steam functions either

together or alternating them, activating both as described in the

previous points. Alternatively, select program 3 (only for the

MCV70 model), pressing the PROGRAM button (see Chapter 5).

Combined use of steam and suction allows the most efﬁcient

sanitising of the surface, dissolving dirt and removing grease,

germs and mites; it allows brightens the colour of ﬁbres and

dries surfaces more quickly.

5. INTEGRATED CLEANING PROGRAMS

UNICO is equipped with preset programs to automatically

regulate the steam pressure and the duration of suction based

on the surface in question. Press the PROGRAM button on the

control panel until the corresponding indicator light for the

desired program lights up.

In preset-program mode, it is possible to activate suction by

pressing the suction button.

To deactivate the program press the PROGRAM button

repeatedly until the indicator light goes off.

6. CLEANING GLASS, WINDOWS AND TILES

6.1 Ensure that points 1.5 and 1.6 have been carried out, then

turn the boiler on using the ON button and adjust the strength

of the steam using the +/- buttons (to turn the boiler off, press

and hold the OFF button for a few seconds). For this type of

surface, we recommend a medium level of steam. The steam

indicator light will start ﬂashing and continue until the correct

temperature is reached.

6.2 For the Model MCV70 Connect the 2-in-1 brush to the

handle or the telescopic tube.

Press the cursor and slide forwards on the accessory in order

to remove the rubber frame.

Ensure that the steam lock on the handle is deactivated.

WARNING: To clean glass surfaces in particularly cold seasons,

preheat the windows starting from a distance of about 50 cm

from the surface.

To avoid any dirt in the dirt collector causing bad smells

(especially where liquids are vacuumed and/or steam is used),

we recommend emptying and cleaning after every use

according to the methods described in Chapter 13.

For safety reasons, activate the steam lock on the handle

during vacuuming.

HARD FLOORING - Press and hold the steam trigger

on the handle for the desired length of time, up to a

maximum of 30 seconds. On release of the button,

vacuuming will begin automatically for the required time

to dry the surface. Repeat the operation until cleaning is

complete.

DELICATE FLOORING/UPHOLSTERY - By pressing

and holding the trigger on the handle both the steam and

suction functions will be activated. Steam will be

dispensed intermittently to preserve the delicate surface.

GLASS/CARPET - Press and hold the steam trigger on

the handle for the desired length of time, up to a maximum

of 30 seconds. On release of the button, vacuuming will

begin automatically for the required time to dry the

surface. Repeat the operation until cleaning is complete.

MCV70

To avoid any dirt in the dirt collector causing bad smells

(especially where liquids are vacuumed and/or steam is used),

we recommend emptying and cleaning after every use

according to the methods described in Chapter 13.

WARNING: Before cleaning leather or fabrics with steam,

consult the manufacturer’s instructions and always carry out

a test on a hidden part or on a sample of the material. Allow

the steamed part to dry to make sure that no changes in

colour or deformations have occurred.

WARNING: For additional safety, test steam delivery on a

hidden part, leave the steamed part to dry to ensure that no

changes in colour or deformation have occurred.

Before removing the holder with cloth from the brush, wait a

few minutes to allow the cloth to cool. Never use the holder

without a cloth.

| 27 |

ENGLISH

Manuale UNICO MCV50-MCV70 VERSIONE 16-09-14_vers7:UNICO 22/09/2014 16.19 Pagina 27

Polti UNICO MCV70 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti UNICO MCV70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info