Bedienungsanleitung Polti Unico MCV80 (Seite 14 von 26) (Englisch)

648707

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

1. PREPARATION FOR SUCTION FUNCTION USE

(Chart Page 2)

1.1 Insert the vacuum tube into the body of the appliance.

1.2 Lock the telescopic tube to the handle and adjust to the

desired height.

1.3 Connect the Multibrush brush to the telescopic tube.

Tips: To facilitate the following operations, lock the brush to the

parking system.

1.4 Completely unwind the power cable and connect it to an

appropriate mains socket (1). Always use the product with the

cable completely unwound.

1.5 Switch on the appliance by pressing the power switch. The

indicator light next to it will come on. The appliance is ready for

use. To start the suction, press the vacuum button on the control

panel (3).

1.6 It is possible to adjust the suction power by moving the

cursor on the handle (4).

1.7 Unico can be used with the FrescoAspira air freshener tabs.

Based on natural essences, it releases a pleasant fragrance

during the suction operations. Refer to Chapter 26 for the use of

FrescoAspira.

2. PREPARATION FOR STEAM USE (Chart Page 2)

2.1 Lock the steam hose to the vacuum tube, then insert them

to the body of the appliance, making sure that the two

connectors at the ends of the vacuum tube are connected.

Without the steam hose, it is impossible to activate the steam,

even with the boiler switched on.

2.2 To connect the machine side steam hose, lower the steam

attachment door and insert the steam connectors, sliding it into

position until you hear a click as it locks into place (diagram

page 2 - F).

2.3 Open the door of the tank and fill it with water, taking care

that it does not overflow (10). Close the door.

This operation must always be carried out with the power cable

disconnected from the mains.

Thanks to the self-filling system, it is not necessary to wait for the

appliance to cool before refilling the boiler with water.

When the water in the water tank runs out, the “Out of water”

indicator light will light up on the control panel (tap symbol) and

you will hear a beep.

To continue use, it is sufficient to refill the tank.

2.4 Completely unwind the power cable and connect it to an

appropriate mains socket. Always use the product with the

cable completely unwound.

2.5 Switch on the appliance by pressing the power switch (2). The

indicator light next to it will come on. The appliance is ready for

use. To use steam, switch on the boiler by pressing the ON (12)

button and adjust the steam depending on the surface to be

treated as detailed in Chapter 4.

2.6 When the boiler is turned on, the steam indicator light flashes:

the boiler is heating up. When the indicator light is constant, after

around 5 minutes (13) the appliance is ready for steam function

use.

2.7 The handle has a safety button which prevents involuntary

activation and accidental steam delivery (14). Should the

appliance be left momentarily unguarded when the appliance

is activated, move the safety button to the “steam lock” position

(14-A). To resume delivery, move the button to the initial

position (14-B) and press the steam trigger on the handle (15).

3. PREPARATION FOR USE OF COMBINED

STEAM / SUCTION FUNCTION

The steam and suction functions can be used at the same time

to wash and sanitise the surfaces and then dry them. For the

combined function, prepare the product as described in Chap-

ters 1 and 2.

4. STEAM ADJUSTMENT

It is possible to adjust the intensity of the steam using the

+/buttons. (16). Here are some tips for regulating it:

• Maximum level: for resistant floors and surfaces, to remove

limescale, stains and grease;

• Medium level: to clean windows, floors and clean and bri-

ghten rugs and carpet;

• Minimum level: to clean parquet and laminate, delicate fa-

brics, upholstery, sofas and mattresses, etc. and to steam

plants.

WARNING: The level of dirt vacuumed should not exceed the

MAX indicator on the dirt collector; this indicator refers to both

solid and damp dirt (9). Upon reaching the maximum level, see

Chapter 17.

We recommend using the accessories holder, to be attached

to the appliance (7) or directly to the push/pull handle (8), to

have the accessories close at hand during the cleaning

operations.

We recommend using the special push/pull handle to move

the appliance more easily during cleaning operations (5-6).

Do not use the push/pull handle to lift the appliance.

We recommend using the special push/pull handle to move

the appliance more easily during cleaning operations. Do not

use the push/pull handle to lift the appliance.

We recommend using the accessories holder, to be attached

to the appliance (7) or directly to the push/pull handle (8), to

have the accessories close at hand during the cleaning

operations.

WARNING: When first operating steam, there may be some

drops of water mixed with the steam due to temperature

imbalances.

Direct the first jet of steam onto a rag.

| 32 |

ENGLISH

UNICO MCV80-MCV85 - M0S11431 - 1Q09:UNICO 30/08/2016 16.17 Pagina 32

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Unico MCV80 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info