Bedienungsanleitung Polti Unico MCV80 (Seite 16 von 26) (Englisch)

648707

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

ENGLISH

| 34 |

6.3 In pre-set-program mode, it is possible to activate suction

by pressing the suction button (3).

To stop the program being used, press and quickly release the

steam delivery button.

To restart the program press the steam delivery button for at

least one second.

To deactivate the program press the PROGRAM button

repeatedly until the indicator light goes off.

7. CLEANING HARD FLOORS

(tiles, ceramic surfaces, stoneware, ...)

SUCTION ONLY FUNCTION

7.1 For suction alone, set the Multibrush brush to position C

(bristle inserts) pressing the pedal (which ensures that the

holder with cloth is not

attached to the brush).

Make sure that Chapter 1 has been carried out and begin the

cleaning operations.

It is possible to adjust the suction power by moving the cursor

on the handle (4).

STEAM ONLY FUNCTION

To clean using steam alone, it is possible to use the abrasive

action of the cloths supplied, attaching them to the special

holder (18). Position the holder with the cloth on the floor and

position the multibrush above it in position A (no insert), apply

slight pressure until it clicks, locking into place (19).

Make sure that Chapter 2 has been carried out and begin the

cleaning operations.

It is possible to adjust the intensity of the steam by using the +/-

buttons (see Chapter 4); for this type of surface we recommend

the maximum level of steam.

STEAM - VACUUM COMBINED FUNCTION

to sanitise and dry the surface

For steam cleaning and suction, set the Multibrush in position B

(rubber inserts) and ensure that the holder with cloth is not

attached to the brush. Make sure that Chapters 1 and 2 have been

performed and proceed with the cleaning operations: first by

steaming and then vacuuming to dry.

It is possible to adjust the intensity of the steam by using the +/-

buttons (see Chapter 4); for this type of surface we recommend

the maximum level of steam.

It is possible to adjust the suction power by moving the cursor

on the handle.

The combined use of steam and suction allows the most

efficient sanitising of the surface, dissolving dirt, eliminating

grease, germs and mites, and above all makes it possible to

remove excess humidity and reduce the cleaning operations

time.

PROGRAMMED MODE

For this type of surface there is a pre-set cleaning program, see

Chapter 6.

8. CLEANING DELICATE FLOORS

(wooden, stone, waxed surfaces, etc.)

SUCTION ONLY FUNCTION

For suction alone, set the Multibrush to position C (bristle

inserts) pressing the pedal (make sure that the holder with cloth

is not

attached to the brush).

Make sure that Chapter 1 has been carried out and begin the

cleaning operations.

It is possible to adjust the suction power by moving the cursor

on the handle (4).

STEAM ONLY FUNCTION

For cleaning only with steam, set the Multibrush to position A

(no insert). Attach the cloth supplied to the relative holder;

place the holder with cloth on the ground and position the

brush above, applying slight pressure until a click is heard as it

locks into place (19).

Make sure that Chapter 2 has been carried out and begin the

cleaning operations.

It is possible to adjust the intensity of the steam by using the +/-

buttons (see Chapter 4); for this type of surface we recommend

the minimum level of steam.

STEAM - VACUUM COMBINED FUNCTION

to sanitise and dry the surface

For cleaning with steam and suction, set the Multibrush to

position A (no insert). Attach the cloth supplied to the relative

holder (18); place the holder with cloth on the ground and

position the brush above, applying slight pressure until a click

is heard as it locks into place (19).

Before removing the holder with cloth from the brush, wait a

few minutes to allow the cloth to cool. Never use the holder

without a cloth.

For safety reasons, apply the steam lock on the handle during

vacuuming.

Before removing the holder with cloth from the brush, wait a

few minutes to allow the cloth to cool. Never use the holder

without a cloth.

To avoid any dirt in the dirt collector causing bad smells

(especially where liquids and/or steam humidity are

vacuumed), we recommend emptying and cleaning after every

use according to the methods described in Chapter 17.

Before using the appliance on delicate surfaces, ensure that

the part in contact with the surface is free from foreign bodies

that could cause scratches.

For safety reasons, apply the steam lock on the handle during

vacuuming.

UNICO MCV80-MCV85 - M0S11431 - 1Q09:UNICO 30/08/2016 16.17 Pagina 34

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Unico MCV80 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info