Bedienungsanleitung Polti Vaporetto Lecoaspira FAV80 Turbo Intelligence (Seite 12 von 21) (Englisch)

648713

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

USE OF FRAMES FOR FLOORS

5. CLEANING HARD FLOORS

(tiles, ceramic surfaces, etc.)

Make sure that you have prepared the appliance following the

instructions provided in Chapter 1.

5.1 Connect the two extension tubes (3) to the handle (1).

5.2 For suction only, connect the universal brush (2) with the frame

w/bristles (2a) and follow the instruction indicated in point 4.1.

5.3 For steam cleaning and suction attach the frame for liquids

(2b) to the universal brush (2).

5.4 Select programme P1 for model , P0

for the model , as indicated in Chapter 3.

This programme is specifically for cleaning

parquet and delicate floors. The function involves

the combined action of an intermittent flow of

steam with adequate suction force.

5.5 Wait for the indicators to remain lit.

5.6 Disconnect the steam lock on the handle and hold the steam

button down to start dispensing steam.

Steam starts to be dispensed continuously and suction starts at

the same time. Release the steam button to stop the steam flow,

while suction will continue to dry the surface treated.

If you need to restart the programme to complete cleaning of

the surface, just press the steam button again.

The combined use of steam and suction allows the most efficient

sanitising of the surface, dissolving dirt, eliminating grease,

germs and mites, and above all allows drying of the surfaces.

In this position, it is also possible to vacuum small quantities of

liquids and dry the floor.

Once the cleaning cycle is finished, it is possible to start suction

by pressing the suction button to remove any residual humidity.

5.7 For steam cleaning only, proceed as indicated in point 4.2.

It is possible to use the abrasive action of the universal cloth

supplied (10). Attach it to the universal brush (2) before starting

to clean the surface.

6. CLEANING DELICATE FLOORS

(wooden, stone, waxed surfaces, etc.)

Make sure that you have prepared the appliance following the

instructions provided in Chapter 1.

6.1 Connect the two extension tubes (3) to the handle (1).

6.2 For suction only, connect the universal brush (2) with the

frame w/bristles (2a) and follow the instruction indicated in

point 4.1.

6.3 For steam cleaning and suction attach the rug/carpet frame

(2c) to the universal brush (2). Attach the parquet cloth

supplied (14) to the universal brush (2).

6.4 Select programme P2 for model , P1

for the model , as indicated in Chapter 3.

This programme is specifically for cleaning

parquet and delicate floors. The function involves

the combined action of a delicate intermittent

flow of steam with adequate suction force.

6.5 Wait for the indicators to remain lit.

6.6 Disconnect the steam lock on the handle and hold the steam

button down to start dispensing steam.

Intermittent steam starts to be dispensed and suction starts at

the same time. Release the steam button to stop the steam flow,

while suction will continue for a few seconds more to dry the

surface treated.

If you need to restart the programme to complete cleaning of

the surface, just press the steam button again.

7. CLEANING RUGS AND CARPETS

Make sure that you have prepared the appliance following the

instructions provided in Chapter 1.

7.1 Connect the two extension tubes (3) to the handle.

WARNING: Before cleaning fabrics with steam, consult the

manufacturer’s instructions and always carry out a test on a

hidden part or on a sample of the material. Allow the steamed

part to dry to make sure that no changes in colour or

deformations have occurred.

Before removing the cloth from the brush, wait a few minutes

to allow the cloth to cool.

The suction speed and the quantity of steam are preset and

therefore they cannot be adjusted manually.

FAV70

FAV80

The suction speed and the quantity of steam are preset and

therefore they cannot be adjusted manually.

For safety reasons, engage the steam lock on the handle

during vacuuming.

HARD FLOORS DELICATE FLOORS RUGS/CARPETS

BRISTLE FRAME (2a)

suction only

BRISTLE FRAME (2a)

suction only

BRISTLE FRAME (2a)

suction only

RUBBER FRAME (2b)

for steam and suction.

The universal cloth can

be used combined with

the RUGS/CARPET

FRAME (2c).

RUGS/CARPET

FRAME (2c) with

parquet cloth for

steam and suction

RUGS/CARPET

FRAME (2c) for steam

and suction

Before removing the cloth from the brush, wait a few minutes

to allow the cloth to cool.

WARNING: For additional safety, test steam delivery on a

hidden part, leave the steamed part to dry to ensure that no

changes in colour or deformation have occurred.

Before using the appliance on delicate surfaces, ensure that

the part in contact with the surface is free from foreign bodies

that could cause scratches.

For safety reasons, engage the steam lock on the handle

during vacuuming.

FAV80

FAV70

| 29|

ENGLISH

PRELIMINARE LECOASPIRA FAV70_80 - 2015_vers7:UNICO 04/05/2015 17.28 Pagina 29

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Vaporetto Lecoaspira FAV80 Turbo Intelligence Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti Vaporetto Lecoaspira FAV80 Turbo Intelligence

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info