POWPB40400 EN
Copyright © 2020 VARO P a g e | 8 www.varo.com
9 ASSEMBLY
9.1 Assembling the handle Fig. 2
The handle is suitable for either left or righthanded use.
▪ Install the handle in such way that the holes match the screwholes on the machine.
▪ Tighten the handle with the bolts and hexagon key.
9.2 Assembling accessoires Fig. 3
▪ Press the spindle lock (a)
▪ Screw and tighten the pad holder on the spindle
▪ Depress the spindle lock
▪ Mount the wanted accessorie onto the pad holder.
9.3 Accessoires Fig. 4
9.3.1 Sanding paper (1)
This is used for sanding and polishing new paints and plastics.
9.3.2 Fiber pad (2)
This is used in combination with other pads.
9.3.3 Wool polishing pad (3)
This is used for a high gloss finish. To be used in combination with the fiber pad
10 USE
Always follow the safety instructions and keep to the applicable
regulations.
▪ Hold the machine away from the work piece when turning it on and off.
10.1 Speed control Fig. 5
The speed of the disc can be controlled with the rotary knob on top of the handle. The higher
the position, the higher the speed.
When applying the wax and polishing do not start at a high speed.
10.2 Switching on and off (Fig. 6)
▪ Start the machine by pushing the unlock button (b) and the on/off switch. (a) at the same
time
10.3 Switch Off
Release the switch.
The polisher will continue to run after it is turned off.
Only lay the machine down once the motor has completely stopped turning. Do not put the
machine on a dusty surface. Dust particles can penetrate the machine.
Never use the spindle key to stop the motor turning.
