POWPG10120 EN
Copyright © 2020 VARO P a g e | 7 www.varo.com
▪ If the blade stopping device doesn’t work, please contact service centre for help.
Warning: Do not touch rotating blade.
Warning: Refuel in a well ventilated area with the engine stopped.
6 SAFETY WARNINGS
▪ Operate the lawn mower only with the grass box and/or the deflector plate installed.
▪ Stop the engine before emptying the grass box or adjusting the cutting height.
▪ Keep your hands and feet away from the area under the lawn mower or under the grass
discharge, while the engine is running.
▪ Before mowing, clear the lawn of any foreign objects which could be thrown up by the
lawn mower.
▪ Keep children, other persons and pets at a safe distance, while operating the lawn
mower.
▪ Never tilt the lawn mower while starting it.
7 SAFETY WARNINGS GASOLINE
WARNING: Use extra care in handling fuels. They are flammable and the
vapours are explosive. The following points must be observed.
▪ Use only an approved container.
▪ Never remove the fuel cap or add fuel with the power source running. Allow engine
exhaust components to cool before refuelling.
▪ Do not smoke.
▪ Never refuel the machine indoors.
▪ Never store the machine or fuel containers inside, where is an open flame, such as a
water heater.
▪ If fuel is spilled, do not attempt to start the power source, but move the machine away
from the area of spillage before starting.
▪ Always replace and securely tighten the fuel cap after refuelling.
▪ If the tank is drained, this should be done outdoors.
8 ASSEMBLY
8.1 Folding handle
▪ Fix the lower handlebars into the unit body with bolts and locking knobs (Fig. 1A).
▪ Lift the two locking levers to release the upper handlebars for folding.
▪ Push the locking lever closed to lock the handlebars in the operating position (Fig. 1B).
▪ Adjust the tension by turning the lock nut with a suitable spanner.
▪ Attach the cable-clamp to the position shown and then attach the cable (Fig. 1C, Fig. 1D).
Caution: Traction and starter cables must always be positioned on top of
the cross bar of the push handle. This provides free movement of the
cables on top of the lower section of the push handle, when the handle is
folded. Incorrect mounting of these cables could lead to damaging and/or
straining them, resulting in a malfunction of the machine. In this case the
guaranty is void.
