POWPG10120 EN
Copyright © 2020 VARO P a g e | 8 www.varo.com
8.2 Adjustment for an appropriate angle (Fig. 2)
▪ Pull the locking lever opening.
▪ Rotating the upper handle centred of the angle adjusting gear for adjusted an appropriate
angle into the scope -20° to 20° as shown in Fig. 2.
▪ Push the locking lever closed to connect the lower handle and the upper handle.
8.3 Mounting and dismounting the grass catcher
▪ To fit: Raise the rear cover and hitch the grass catcher on rear of mower (Fig. 3A) (Fig.
3B).
▪ To remove: grasp and lift rear cover, remove grass catcher.
8.4 Starter handle
Move the starter handle from the engine to the rope guide (Fig. 4A).
8.5 Height of cut
Apply outward pressure to disengage lever from rack. Move lever forward or back to adjust
height (Fig. 5 and see clause 10.7).
9 5 IN 1
These lawn mowers can be retrofitted from its normal function, based on the application
purpose:
▪ From lawn mower with rear discharge to:
Mulching mower or as side-discharge mower.
9.1 What is mulching?
When mulching, the grass is cut in one working step, then finely chopped and returned to the
grass strip as natural fertilizer.
Hints for mulch-mowing:
▪ Regular cut-back by max. 2 cm from 6 cm to 4 cm grass height.
▪ Use a sharp cutting knife.
▪ Do not mow wet grass.
▪ Set to max. motor speed.
▪ Only move at working pace.
▪ Regularly clean mulching wedge, housing inner side and mowing blade.
9.2 Different uses
9.2.1 Retrofitting for mulching mower
WARNING: only with a stopped motor and standstill cutter.
1. Raise the rear cover and remove the grass catch bag (Fig. 6A).
2. Push the mulching wedge into the deck. Lock the mulching wedge with the button into the
opening on the deck (Fig. 6B).
3. Lower the rear cover again.
9.2.2 Resetting for side-discharge mowing
WARNING: only with a stopped motor and standstill cutter.
▪ Lift the rear cover and remove the grass catch bag.
▪ Mount the mulching wedge.
▪ Lift sidewards flap for side discharge (Fig. 7A).
