Bedienungsanleitung Powerplus POWX0026LI (Seite 6 von 12) (Englisch)

676177

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

POWX0026LI EN

 If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause irritation or burns.

5.6 Service

 Your power tool should be serviced by a qualified specialist using only standard spare

parts. This will ensure that it meets the required safety standards.

6 DRILL SAFETY WARNINGS

1 Hold power tools by insulated gripping surfaces when performing an operation where

the cutting tool may contact hidden wiring. Contact with a ″live″ wire will make exposed

metal parts of the tool ″live″ and shock the operator.

2 Let bit cool before touching, changing or adjusting it. Bits heat up dramatically while in

use, and can burn you.

3 Maintain labels and nameplates on the tool. These carry important safety information.

If unreadable or missing, contact VARO for a replacement.

4 Avoid unintentional starting. Prepare to begin work before turning on the tool.

5 Do not lay the tool down until it has come to a complete stop. Moving parts can grab the

surface and pull the tool out of your control.

6 When using a handheld power tool, maintain a firm grip on the tool with both hands to

resist starting torque.

7 Do not leave the tool unattended when the Battery Pack is connected. Turn off the tool,

and remove the Battery Pack before leaving.

8 The battery Charger gets hot during use. The Charger’s heat can build up to unsafe

levels and create a fire hazard if it does not receive adequate

ventilation, due to an electrical fault, or if it is used in a

hot environment. Do not place the Charger on a flammable surface.

Do not obstruct any vents on the Charger.

Especially avoid placing the Charger on carpets and rugs; they are not only

flammable, but they also obstruct vents under the Charger. Place the Charger on a

stable, solid, non-flammable surface (such as a stable metal workbench or concrete

floor) at least 1 foot away from all flammable objects, such as drapes or walls. Keep a

fire extinguisher and a smoke detector in the area. Frequently monitor the Charger and

Battery Pack while charging.

9 This product is not a toy. Keep it out of reach of children.

10 The warnings, precautions, and instructions discussed in this instruction manual cannot

cover all possible conditions and situations that may occur. It must be understood by the

operator that common sense and caution are factors which cannot be built into this

product, but must be supplied by the operator.

7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND

CHARGERS

7.1 Batteries

 Never attempt to open for any reason.

 Do not store in locations where the temperature may exceed 40 °C.

 Charge only at ambient temperatures between 4 °C and 40 °C.

 Charge only using the charger provided with the tool.

 When disposing of batteries, follow the instructions given in the section “Protecting the

environment”.

 Do not cause short circuits. If connection is made between the positive (+) and negative (-)

terminal directly or via accidental contact with metallic objects, the battery is short circuited

and an intense current will flow causing heat generation which may lead to casing rupture

or fire.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWX0026LI Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWX0026LI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info