POWX075751DB EN
Copyright © 2022 VARO P a g e | 11 www.varo.com
▪ Take the saw blade (7) off the inner flange (34) and pull out downwards.
▪ Carefully clean the flange screw (32), outer flange (33) and inner flange (34).
▪ Fit and fasten the moveable blade guard (6) in reverse order.
▪ Important! The cutting angle of the teeth, in other words the direction of rotation of the
saw blade (7) must coincide with the direction of the arrow on the housing.
▪ Move the guide bar into position and tighten the screw (f) again.
▪ Before continuing your work make sure that all safety devices are in good working
condition.
Important: Every time that you change the saw blade (7), check to see that it
spins freely in the table insert (11) in both perpendicular and 45° angle
settings.
Important: The work to change and align the saw blade (7) must be carried
out correctly.
10 TECHNICAL DATA
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).
13 STORAGE
▪ Thoroughly clean the whole machine and its accessories.
▪ Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
▪ Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
▪ Don’t keep it in plastic bags to avoid humidity build-up.
