Bedienungsanleitung Powerplus POWX0760 (Seite 7 von 23) (Englisch)

677891

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

POWX0760 EN

 If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of these devices can reduce dust related

hazards.

5.4 Power tool use and care

 Do not force the power tool. Use the correct power tool for your application. The correct

power tool will do the job better and safer at the rate for which it was designed.

 Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

 Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

 Store idle power tools out of the reach of children and do not allow persons unfamiliar with

the power tool or these instructions to operate the power tool. Power tools are dangerous

in the hands of untrained users.

 Maintain power tools. Check for misalignment or sticking of moving parts, breakage of

parts and any other condition that may affect the power tool’s operation. If damaged, have

the power tool repaired before use. Many accidents are caused by poorly maintained

power tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to stick and are easier to control.

 Use the power tool, accessories and tool bits etc., in accordance with these instructions

and in the manner intended for the particular type of power tool, taking into account the

working conditions and the work to be performed. Use of the power tool for operations

different from intended could lead to a hazardous situation.

5.5 Service

 Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

6 ADDITIONAL SAFETY INSTRUCTIONS FOR TABLE SAWS

6.1 For both Mitre saw mode and table saw (bench saw) mode:

 Wear eye and hearing protection. Other suitable personal protective equipment should be

worn.

 NEVER wear gloves during operation except for replacing saw blades or handling rough

material before operation.

 Keep the floor area around the tool level, well maintained and free of loose materials e.g.

chips and cut-offs.

 Do not operate saw without guards and riving knife in place. Check blade guards for

proper closing before each use. Do not operate saw if blade guards do not move freely

and close instantly. Never clamp or tie the blade guards into the open position. Any

irregular operation of the blade guards should be corrected immediately.

 Clean and be careful not to damage the spindle, flanges (especially the installing surface)

and hex bolt before or when installing the blade. Damage to these parts could result in

blade breakage. Poor installation may cause vibration/ wobbling or slippage of the blade.

Use only flanges specified for this tool.

 Check the blade carefully for cracks or damage before operation. Do not use saw blade

which are damaged or deformed.

 Use only saw blades recommended by the manufacturer and which conform to EN847-1,

and observe that the riving knife must not be thicker than the width of the cut by the saw

blade and not thinner than the body of the blade.

 Always use accessories recommended in this manual. Use of improper accessories such

as abrasive cut-off wheels may cause an injury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWX0760 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWX0760

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info