Bedienungsanleitung Powerplus POWXG2061 (Seite 9 von 16) (Englisch)

582051

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

POWXG2061 EN

10.2 Fuel handling

10.2.1 Fuel safety

Never start the machine:

 If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

 If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of

your body that has come in contact with fuel. Use soap and water.

 If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

10.2.2 Transport and storage

 Store and transport the machine and fuel so that there is no risk of any leakage or fumes

coming into contact with sparks or naked flames, for example, from electrical machinery,

electric motors, electrical relays/ switches or boilers.

 When storing and transporting fuel always use approved containers intended for this

purpose.

 When storing the machine for long periods the fuel tank must be emptied. Contact your

local petrol station to find out where to dispose of excess fuel.

 Ensure the machine is cleaned and that a complete service is carried out before long-term

storage.

 The transport guard must always be fitted to the cutting attachment when the machine is

being transported or in storage.

 Secure the machine during transport.

 In order to prevent unintentional starting of the engine, the spark plug cap must always be

removed during long-term storage, if the machine is not under close supervision and when

performing all service measures.

Take care when handling fuel. Bear in mind the risk of fire, explosion and

inhaling fumes.

10.2.3 Fuel

The machine is equipped with a two-stroke engine and must always been run using a mixture

of petrol and two-stroke oil. It is important to accurately measure the amount of oil to be mixed

to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small

inaccuracies can drastically affect the ratio of the mixture.

Fuel and fuel fumes are highly inflammable and can cause serious injury

when inhaled or allowed to come in contact with the skin. For this reason

observe caution when handling fuel and make sure there is adequate

ventilation.

10.2.4 Petrol

Always use a quality petrol/oil mixture at least 90 octane (RON). If your machine is equipped

with a catalytic converter (see chapter on Technical data) always use a good quality unleaded

petrol/oil mixture. Leaded petrol will destroy the catalytic converter.

Use low-emission petrol, also known as alkylate petrol, if it is available.

The lowest octane recommended is 90 (RON). If you run the engine on a lower octane grade

than 90 so- called knocking can occur. This gives rise to a high engine temperature, which can

result in serious engine damage.

When working at continuous high revs a higher octane rating is recommended.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWXG2061 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWXG2061

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info