POWXG6462 EN
Copyright © 2020 VARO P a g e | 11 www.varo.com
▪ Only switch the shredder off when all of the shredding material has passed through the
cylinder. Otherwise, the cylinder may jam the next time you switch the shredder on.
10.1.1 Mulching
The following types of material can be mulched in the shredder:
▪ Twigs and branches.
▪ Waste from cutting bushes.
▪ Waste from hedge-trimming.
Examples of materials which are not suitable for mulching include:
▪ Glass, metal, plastic bags, stones, fabric, and earth covered roots.
▪ Waste that does not have a firm consistency, e.g. kitchen waste.
▪ Soft leafy material.
CAUTION: The maximum diameter of twigs and branched, which are
shredded or mulched with this unit, must not exceed 40 mm. Bigger sized
materials could damage the unit.
Branches and twigs should be mulched shortly after being cut. They become extremely hard
when they dry out, and the maximum diameter of what can be mulched is reduced. Heavy
material or twigs will jam the blades if you let the machine cut continually. A large proportion of
garden waste contains a lot of water and therefore sticks easily. Such material should be
allowed to dry for a few days before being processed.
Check all the material you want to shred carefully. Make sure it doesn’t contain any stones or
nails as this might severely damage the shredder.
Be aware of vibrations. Heavy vibrations are caused by damaged or worn out blades. Store
the shredder indoors in a dry place.
10.1.2 Composting
The processed material can be composted in various ways:
▪ The material can be placed in a heap directly on the ground (cold composting).
▪ The material can be placed in a plastic container, wooden crate, skeleton container or
similar (cold composting).
▪ The material can be placed in an insulated compost holder. The heat is then held for
longer and the rotting process also continues during the winter. This method produces
faster results (warm composting).
▪ The material can be spread directly onto the garden (surface composting).
