Bedienungsanleitung Powertec Garden BIG WHEELER 508 VARI-S 05162 (Seite 16 von 44) (Deutsch, Englisch, Französisch)

621122

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

• Before using the mower, always check whether the

blade, blade screws and cutting mechanism are not

damaged or worn out. Any worn out or damaged

blades and screws to be always replaced in the entire

set to prevent any machine imbalance. Do not make

any changes to the protective equipment. Check the

protective equipment at regular intervals if working

properly.

• Keep the machine clean, with no pollution by grass,

leaves or other dirt. Remove any leaked oil or petrol at

all times. Let the engine cool down before storing the

mower to confined spaces.

• Never adjust the height of wheels when the engine is

running.

• The grass collection equipment may lose its

functionality and various items may get thrown away

due to wear or damage. Check regularly the mower

components and replace them with spare parts

recommended by the manufacturer if necessary.

• The mower blade is very sharp. Risk of injury! Be

especially careful when servicing the blade; wear

protective gloves or cover the blades.

• Do not change the basic engine setting and avoid any

engine overloading.

• Switch off the blade if you need to tilt or lift the mower

to cross an area other than grass or when moving the

mower to the area to be cut.

• Release all blade and drive clutches before starting the

engine.

• Start the engine as specified in the Operating

Instructions while making sure your feet are in a safe

distance from the blade.

• When starting, do not tilt the mower except when

necessary. In such a case, do not tilt the mower more

than necessary and lift the side away from you at all

times.

• Do not start the engine when standing in front of the

ejection opening.

• Never lift or carry the mower when the engine is

running.

• Reduce the brake adjustment when switching off the

engine. Shut off the petrol supply after cutting if the

engine has a shut-off valve.

• Make sure your posture is safe when working on

slopes.

• Do not let the combustion engine run in confined

spaces where dangerous carbon monoxide can be

accumulated.

Training

1. Read the instructions carefully. Learn with the control

and regulation equipment and appropriate use of the

machine.

2. Never allow children to use the machine.

3. Never let persons not familiarised with these

instructions to use the machine. Local regulations may

limit the age from and to which the machine may be

used.

4. Never use the machine when there are persons,

especially children or pets, around.

5. The operator or user will bear his own responsibility for

any accident or putting other persons or their property

at risk.

Preparation

1. Solid shoes and long trousers to be worn whenever

using the machine.

2. Do not wear loosely hanging clothing and jewels that

could possibly be drawn in the suction hole. Long hair

should be kept out of reach of suction inlets.

3. Wear protective glasses when working with the machine.

4. Face protection is recommended to be used to prevent

any irritation by dust.

5. Never put the machine into operation if the dividing

protection equipment or protection shields are damaged

or if safety equipment, e.g. collection box, is not fitted.

Operation

Operating lever (stirrup for automatic switch-off) (12) -

press it to the handle when starting. To switch the engine off,

release the lever.

The drive lever (13) is used to move the mower forward.

Area of use:

Mulching

With the mulching wedge inserted (see “Changeover to

mulching”), grass is not ejected but ground by the cutting

blades and grass remains on the lawn as surface

fertilisation.

Cutting and collection

Grass is collected to the collection box (wet or damp grass

reduces the box capacity). To fit the box to the mower, lift

the cover plate and hang the collection box.

Cutting (without collection box)

Cut grass is laid in strips.

Cutting (side ejection)

Cut grass is laid to side in strips. Loosen the screw

(pic. 1/15), remove the side ejection (pic. 1/2) and the screw

and retighten the screw (pic. 1/15).

Changeover to “mulching”

1. Mounting and demounting of accessory equipment

must always be performed with the engine being switched

off.

2. After removing the collection box, insert the mulching

wedge in the ejection channel and lock it so that the

mulching wedge (1) is against both openings (2) on the

bottom part and secured by a self-locking hook (3).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powertec Garden BIG WHEELER 508 VARI-S 05162 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info