Bedienungsanleitung Powertec Garden BIG WHEELER 508 VARI-S 05162 (Seite 20 von 44) (Deutsch, Englisch, Französisch)

621122

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Warranty

The warranty exclusively applies to material or

manufacturing defects. The original proof of purchase

including the date of purchase must be submitted when

applying a claim in the warranty period.

The warranty does not cover any unauthorised use such as

machine overload, violent use, damage by a foreign person

or an undesirable item. The failure to follow the Operating

Instructions and assembly instructions and common wear

and tear are also excluded from the warranty.

Disposal

The disposal instructions are based on icons placed on the

machine or its package. The description of the meanings can

be found in the “Marking“ section.

Transport package disposal

The package protects the machine against damage during

transport. Packing materials are usually chosen depending

on their environmental friendliness and disposal method and

can therefore be recycled. Returning the package to

material circulation saves raw materials and reduces waste

disposal costs. Parts of packages (e.g. foils, styropor®) can

be dangerous to children. Risk of suffocation! Keep parts

of the package away from children and dispose them as

soon as possible.

Maintenance

Do you have any technical questions? A claim? Do you

need spare parts or the Operating Instructions?

You will be helped quickly and without needless bureaucracy

at our webpage www.guede.com in the Services section.

Please help us be able to assist you. To identify your

machine when claimed, we need to know its serial No., order

No, and year of production. All these details can be found on

the type label. Enter the details below for future reference.

Serial No.

Order No.

Year of production:

Tel. +49 (0) 79 04 / 700-360

Fax: +49 (0) 79 04 / 700-51999

Email: support@ts.guede.com

Servicing

Switch the machine off and wait until it fully

stops before any servicing and cleaning.

Any servicing work not explicitly specified in this manual

must be performed by a professional as there may be

dangerous situations the operator is unable to handle. Spare

parts may only be replaced by a professional.

Cleaning

Whenever the machine is to be used, wash it thoroughly with

water, remove any grass and mud from inside. By this, you will

prevent dirt from getting dry inside the machine and problems

when starting the machine the next time.

Paint inside the cabinet may eventually wear away. To

prevent machine corrosion, apply anticorrosion coating to the

abraded spots.

Once or twice a year, remove the gear housing and use a

brush or compressed air to clean the space around the pulleys

and belts.

Once a season, you should clean the inside of the driving

wheels. Remove both wheels. Clean the cogwheels and their

edges off grass and other dirt using compressed air or a brush.

BLADE DISMANTLING

For the purpose of cleaning/treatment/change

Caution!!! Before dismantling, it is necessary to disconnect

the spark plug first.

Release the screw when dismantling the blade.

Put the components together again as shown in the picture.

Tighten the screws. Torque – 40 Nm. The screw should also be

changed when changing the blade.

CHANGING OIL

The oil drain plug is located under the engine. Prepare a

container to capture the oil and remove the oil plug. As soon

as all the oil has drained, fit a new plug with a washer and

wipe off any remaining oil.

Pour new SAE30 oil. Check the oil level using a clean

gauge. The oil level must be between Min and Max on the

gauge. Make sure the tank does not flow over.

Start the engine and let it run for a short time. Switch the

engine off again, wait for a minute and check the oil level.

Add oil if necessary.

Spark plug

As soon as the engine cools down, remove the spark plug

using a wrench included in the supply, clean it with a wire

brush and set the distance to 0.75 mm (0.030”) using a

feeler gauge. Refit the spark plug. Make sure the spark plug

is not tightened too much. (Alternatively: (Bosch WR 7 DC);

(NGK BPR 6 ES)

Oil drain plug

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powertec Garden BIG WHEELER 508 VARI-S 05162 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info