domestic environment.
GENERAL SAFETY REQUIREMENTS
Domestic wiring must be tested periodically by a qualified
electrician at least once every 10 years or at every change of
occupancy. For office and retail premises, and buildings such as
village halls, the wiring must be inspected at least once every 5
years.
It is recommended that all building be fitted with smoke alarms (it is
mandatory for new buildings).
MAINTENANCE
Before cleaning, turn the appliance off, and disconnect from the
mains supply. The appliance may then be cleaned using a damp
cloth with a drop of washing-up liquid to remove any dust or dirt
from the case. Do no use stronger detergents or solvents as these
may damage the plastic.
Using a dry 1" (25 mm) paint-brush, remove any dust from the
grilles.
If the mains lead is damaged, it must be replaced by the
manufacturer or and authorised service centre. If the mains plug
needs to be replaced, proceed as follows:
• Connect the brown wire to the
terminal labelled "L".
• Connect the blue wire to the
terminal labelled "N".
• Connect the green/yellow wire to
the terminal labelled with the earth
symbol or "E".
• Make sure that the cord-grip is
positioned correctly (over the outer
sheath of the cable) and it fully
tightened.
Page 5
