Bedienungsanleitung Pro-form 1300 ZLT - PETL12810 (Seite 22 von 36) (Englisch)

553933

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

THE INFORMATION MODE

The console features an information mode that keeps

rack of the total distance that the walking belt has

moved and the total number of hours that the treadmill

as been used and allows you to select miles or kilo-

meters to measure distance, and to turn on and turn

off the display demo mode. You can also adjust the

contrast level of the display and view the status of the

optional iFit Live module.

To select the information mode, hold down the Stop

button, insert the key into the console, and then re-

lease the Stop button. When the information mode is

selected, the following information will appear in the

display:

The display will show the

total number of kilometers

that the walking belt has

moved and the total number

of hours the treadmill has

been used.

The display will show the selected unit of measure-

ment. To change the unit of measurement, press the

Speed increase button. To view distance in kilometers,

select METRIC. To view distance in miles, select ENG-

LISH.

The console features a display demo mode, designed

to be used if the treadmill is displayed in a store. While

the demo mode is turned on, the console will function

normally when you plug in the power cord, switch the

reset/off circuit breaker to the reset position, and insert

the key into the console. However, when you remove

the key, the displays will remain lit, although the but-

tons will not function. If the demo mode is turned on,

the word ON will appear in display while the informa-

tion mode is selected. To turn on or turn off the demo

mode, press the Speed decrease button.

The display will also show the contrast level of the dis-

play. Press the Incline increase and decrease buttons

to adjust the contrast.

The display will show whether an accessory is plugged

nto the console. If the iFit Live module is plugged in,

the display will show the words “WIFI STATUS.” If a

USB module is plugged in, the display will show the

words “USB STATUS.” If nothing is plugged in, the dis-

play will show the words “NO MODULE DETECTED.”

To exit the information mode, remove the key from the

console.

HOW TO USE THE STEREO SOUND SYSTEM

To play music or audio books through the consoleʼs

stereo speakers, you must connect your MP3 player,

CD player, or other personal audio player to the con-

sole. Locate the audio wire and plug it into the audio

jack on the side of the console. Then, plug the other

end into a jack on your MP3 player, CD player, or

other personal audio player. Make sure that the

audio wire is fully plugged in.

Next, press the Play button on your MP3 player, CD

player, or other personal audio player. Then, adjust the

volume on your personal audio player or press the

Volume increase and decrease buttons on the con-

sole.

If you are using a personal CD player and the CD

skips, set the CD player on the floor or another flat sur-

face instead of on the console.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-form 1300 ZLT - PETL12810 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pro-form 1300 ZLT - PETL12810

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info