Bedienungsanleitung Pro-form 600 ZLT - PETL69910 (Seite 20 von 36) (Englisch)

553946

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

HOW TO USE A CALORIE WORKOUT

1. Insert the key into the console.

See HOW TO TURN ON THE POWER on page 17.

2. Select a calorie workout.

To select a calorie workout, press the Calorie

Workouts button repeatedly until the desired work-

out appears in the display.

When you select a calorie workout, the maximum

incline level of the workout will ash in the lower left

display, the maximum speed setting will ash in the

lower right display, and the approximate number of

calories you will burn will ash in the upper display.

In addition, a prole of the speed settings of the

workout will scroll across the display.

3. Enter your weight if desired.

For the most accurate calorie count, enter your

weight into the console by pressing the Wt.

increase and decrease buttons repeatedly. Note:

Once you have entered your weight, your weight

will be saved in memory.

4. Start the workout.

Press the Start button or the Speed increase button

to start the workout. A moment after you press the

button, the treadmill will automatically adjust to the

rst speed and incline settings of the workout. Hold

the handrails and begin walking.

Each workout is divided into one-minute segments.

One speed setting and one incline setting are pro-

grammed for each segment. Note: The same speed

setting and/or incline setting may be programmed

for consecutive segments.

During the workout, the prole will show your prog-

ress. The ashing segment of the prole represents

the current segment of the workout. The height of

the ashing segment in-

dicates the speed setting

for the current segment.

At the end of each seg-

ment, a series of tones

will sound. If a different

speed and/or incline set-

ting is programmed for

the next segment, the speed and/or incline setting

will ash in the display to alert you and the treadmill

will automatically adjust to the new speed and/or

incline setting.

When the workout ends, the walking belt will slow

to a stop.

If the speed or incline setting is too high or too low

at any time during the workout, you can manu-

ally override the setting by pressing the Speed or

Incline buttons; however, when the next segment

of the workout begins, the treadmill will auto-

matically adjust to the speed and incline set-

tings for the next segment.

To stop the workout at any time, press the Stop

button. To restart the workout, press the Start but-

ton or the Speed increase button. The walking belt

will begin to move at 2 Km/H. When the next seg-

ment of the workout begins, the treadmill will auto-

matically adjust to the speed and incline settings for

the next segment.

5. Follow your progress with the displays.

See step 6 on page 18.

6. Measure your heart rate if desired.

See step 7 on page 19.

7. When you are nished exercising, remove the

key from the console.

See step 8 on page 19.

Current Segment

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-form 600 ZLT - PETL69910 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pro-form 600 ZLT - PETL69910

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info