Bedienungsanleitung Pro-form Performance 1450 - PFTL14511 (Seite 25 von 40) (Englisch)

553999

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

HOW TO USE THE SETTINGS MODE

The console features a settings mode that allows you

o connect the treadmill to your own wireless network

and to log in to your iFit Live account. The settings

ode also allows you to select the unit of measure-

ment and to turn on and turn off the display demo

mode. You may also be able to select a language.

1. Select the settings mode.

Insert the key into the

console (see step 1 on

page 18). Next, select

the start-up menu (see

step 2 on page 18).

Then, touch the i button

near the lower right cor-

ner of the screen to select the settings mode.

2. Select the wireless network mode.

If desired, touch the Wireless Network button on

the screen. Note: It may take a few moments for

the list of wireless networks to appear.

Note: You must have your own wireless network

and an 802.11b/n router with SSID broadcast en-

abled (hidden networks are not supported).

Make sure the WiFi checkbox near the upper right

corner of the screen is marked with a green check-

mark. If it is not, touch the checkbox once and wait

for a few seconds. The console will search for

available wireless networks.

When a list of networks appears, touch the desired

network. Note: You will need to know your network

name (SSID). If your network has a password, you

will also need to know the password.

An information box will ask if you want to connect

to the wireless network. Touch the Connect button

to connect to the network. Touch the Cancel button

o return to the list of networks. If the network has a

password, touch the password entry box. A key-

oard will appear on the screen. To view the pass-

word as you type it, touch the Show Password

checkbox.

To use numbers or other characters on the key-

board on the screen, touch the .?123 button. To

view more characters, touch the Alt button. Touch

the Alt button again to return to the number key-

board. To return to the letter keyboard, touch the

ABC button. To view capital characters, touch the

button with an upward-facing arrow. To return to

the lowercase keyboard, touch the arrow button

again. To clear the last character, touch the button

with a backward-facing arrow and an X.

When the console has connected to your wireless

network, the WiFi box at the top of the screen will

display the word CONNECTED. Then, touch the

home button on the console to return to the set-

tings mode.

To disconnect from a wireless network, select the

wireless network and touch the Forget button.

If you are having problems connecting to an en-

crypted network, make sure your password is cor-

rect. Note: Passwords are case-sensitive.

Note: The iFit Live mode supports unsecured and

secured (WEP, WPA, and WPA2) encryption. A

broadband connection is recommended; perfor-

mance depends on connection speed.

Note: If you have questions after following

these instructions, go to www.iFit.com/support

for assistance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-form Performance 1450 - PFTL14511 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info