Bedienungsanleitung Pro-form SMART STRIDER 535 - PFEL55913 (Seite 15 von 24) (Englisch)

553965

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

HOW TO USE THE SOUND SYSTEM

To play m u s i c o r a udio bo o k s t h r o u g h the c o n s o l e

sound system while you exercise, plug a 3.5 mm male

to 3.5 mm male audio cable (not included) into the

jack on the console and into a jack on your MP3

player, CD player, or other personal audio player;

make sure that the audio cable is fully plugged in.

Note: To purchase an audio cable, see your local

electronics store.

Next, press the play button on

your personal audio player. Adjust

the volume level using the volume

increase and decrease buttons on

the console or the volume control

on your personal audio player.

THE SETTINGS MODE

The console features a settings mode that allows you

to view console usage information and to turn on or

turn off the demo mode.

To select the settings mode, press and hold down the

Performance Workouts button for a few seconds until

the settings information appears in the display.

The left display will show the total number of hours that

the console has been used since the elliptical was pur-

chased. The right display will show the total distance

that the elliptical has been pedaled.

The console features a display demo mode, designed

to be used if the elliptical is displayed in a store. While

the demo mode is turned on, the console will show a

preset presentation when it is not in use. If the demo

mode is turned on, a “d” will appear in the right display.

To turn on or turn off the demo mode, press the vol-

ume decrease button.

To exit the settings mode, press the Performance

Workouts button.

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting to

computer or peripheral devices. Changes or modifications not expressly approved by the party respon-

sible for compliance could void the user’s authority to operate this equipment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-form SMART STRIDER 535 - PFEL55913 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info