Pro-User PS1 14
Ref: PS1-UM-TKI-2021-Rev.A.
- Electrical devices are not toys. Keep the product away from children.
- Only use the product as intended and for purposes described in the
manual.
- After opening the package, examine all parts for visible damage. If
you have found any damage, please contact the company you
purchased this product from.
- This product is not permitted on aircraft.
- It is suggested to charge the product by using original cable supplied
or certified approved cables and AC adapter.
- Do not throw, drop, tap or shake the product.
- Do not attempt to disassemble the product.
- Do not damage or puncture the casing of the product. This may
cause over-heating, fire or an explosion.
- Do not put any bank cards or similar cards with magnetic strips, or
other magnetically sensitive objects, on the product. The data on
the cards could be damaged or deleted.
- Do not dispose of the product in a fire because they may explode.
- Do not dispose of the product in the rain because it is not waterproof.
- Do not attempt to charge the product with battery exposed
or case broken, and do not charge the product that are incompatible
with this product.
- When stored over a long period of time, batteries should be charged
regularly (at least every three months).
- Avoid storing, charging or using batteries in extreme temperatures.
Power on/off function
1. To save power, the power station will automatically turn off after approx. 30 seconds
if no devices are connected, or the connected devices’ current draw is very small, i.e.
less than approx. 3W from AC output, or less than approx. 250mA from DC output, or
less than approx. 200mA from USB output.
2. To disable “30 seconds Auto off” function, press & hold “power on/off”
button for approx. 3 seconds, the power station will be turned on and
will be continuously on for approx. 6 hours even without any
connection. This is needed, for example, to charge small current draw
devices such as Bluetooth earphone.
3. To resume “30 seconds Auto off” function, press & hold “power on/off”
button again for approx. 3 seconds.
NOTE:
LED flashlight is not related to this function, it can be always turned on in any mode.
Charging the power station
1. The power station can be charged by AC Charger supplied. Insert the round end into
“DC Input” port of the power station, then plug the charger into household AC outlet.
2. The power station can be charged by Vehicle Charger supplied. ALWAYS start your
vehicle’s engine first, then insert the round end into “DC Input” port of the power
station and connect the other end into vehicle’s cigarette lighter / auxiliary port. This
Vehicle Charger can be used in both 12Vdc & 24Vdc vehicles.
3. The power station can be charged via USB Type C port by using USB C-C
cable supplied. Connect one end of USB C cable to “USB Type C” port of
the power station, connect the other end to a USB C power outlet such
as USB C wall charger.
4. The power station can be charged by solar panel if its output cable can
