Pro-User PS1 15
Ref: PS1-UM-TKI-2021-Rev.A.
be inserted into “DC Input” port of the power station and its output
voltage is within 12Vdc ~ 24Vdc. This power station is equipped with a
simple MPPT algorithm (maximum power point tracking) , which means it
can be charged approx. 50% faster than same product without MPPT.
Note:
-Only use one of the charging methods at any time and charge the power station fully
before first use.
- USB C wall charger is NOT included in the package. It is recommended to
use a PD charger (60W or more) with the cable supplied, in order to obtain
the maximum charging power.
-Solar panel & its output cable is NOT included in the package.
-Do not expose the power station under direct sunlight.
-Always use supplied or certified chargers and cables for charging.
Power station output - AC
1. The power station has 2 x AC outputs which can be used simultaneously.
Please be aware the maximum output power, either for 1 or for 2, is
300W.
2. Plug the appliance into AC output, then press “AC Power” button for
approx. 3 seconds to turn it on. When AC power is on, the white LED
indicator next to the button will be always lit.
3. To turn AC power off, you can simply unplug or short press “AC POWER”
button once. When AC power is off, the white LED indicator will be always
off as well.
Power station output – DC
1. The power station has a DC output. Please be aware that it’s ONLY for
12Vdc appliances and its maximum output is 12V10A / 120W.
2. Please choose the correct type of DC cable & its connector before using,
you may refer to “Technical Description” page.
3. Connect the 12Vdc appliance to the DC output port, the power station
will automatically turn on and supply power.
4. After using, simply disconnect the 12Vdc appliance from the power
station.
Power station output – USB
1. Use suitable USB cable(s) to connect digital device(s) and the power
station’s USB port(s), the power station will automatically turn on and
supply power.
2. USB ports can be used at the same time, the individual output power is:
2.1 USB 1 (Type-C PD) port is compatible with most USB PD devices, it
supports fast charging up to 60W.
2.2 USB 2 is 5Vdc 2.4A/12W max each port, total 24W.
2.3 USB 3 (QC) port is compatible with most quick charge devices, it
supports fast charging up to 18W.
3. After using, simply disconnect digital devices from the power station.
LED flashlight
Short press “power on/off” button to toggle from On, SOS, Strobe to Off.
Pass through function
The power station can charge other devices while it is being charged.
However, please be aware that power station input power shall be bigger
than output, otherwise, the batteries will run flat.
