Bedienungsanleitung Pro-User PSI1000TX (Seite 4 von 82) (Deutsch, Englisch, Holländisch, Französisch)

807468

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

• Use only approved accessories (especially all cables) or parts fully consistent with the

requirements. The installer is responsible for ensuring that the correct cable and fuse sizes

are used.

• The surface temperature can reach up to 65°C. Power-o and stop using the device

immediately, if the unit is smoking or is showing any abnormal behaviour.

• This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they are

supervised or have been instructed on how to use the appliance by a person responsible for

their safety. Children should be supervised to ensure that they do not play with the

appliance.

• Installing the device, maintenance and repair work may only be carried out by qualiﬁed

person who are familiar with the risks involved, the relevant regulations and with the

guidelines and safety precautions to be applied.

• Do not disassemble the inverter, the internal circuit contains hazardous voltages.

Attempting to service the unit yourself may result in electric shock or ﬁre and will void the

unit warranty.

• Always keep metal objects or other materials that can short circuit the terminals of the

battery or the inverter securely away. A resulting spark or short-circuit may not only damage

the device, but also cause an explosion and potentially produce a current high enough to

weld a ring or the like to metal. Remove personal metal items such as rings, bracelets,

necklaces and watches when working on the device or the battery.

• Operate the inverter only, if all cables and the housing are undamaged and all connections

are tight and clean. Loose or dirty connections could result in overheating, electrical sparks

and ﬁre.

• Do not connect AC output terminals of the inverter to an incoming AC source (or the grid).

• Do not connect DC input terminals of the inverter to an incoming AC source.

• Never use the inverter on vehicles where the positive terminal of the battery is connected to

the chassis.

• Never connect cables in reverse polarity or short-circuit connected cables. This may blow

internal fuses and may damage the inverter permanently.

• A fuse should be provided at a distance of max. 30 cm from the battery´s positive terminal.

Failure to do so, may cause damage to the cabling or battery if a fault (e.g. over-current or

short circuit) occurs. Only use high quality copper cable and keep the cable length short.

• Do not operate appliances that may feed AC main power back into the inverter. This might

damage the inverter.

• Ensure the device is standing ﬁrmly. The device must be set up and fastened in such a way

that it cannot tip over or fall down.

• Never connect devices that have a higher power requirement than the peak output power of

the inverter. Note that some devices may require more starting current than the type plate of

the device indicates.

Working with Batteries

Working with BatteriesWorking with Batteries

Working with Batteries

• Batteries can store large amounts of energy and improper handling can be dangerous. Never

connect to a battery with an unsuited voltage or other unsuitable or damaged batteries.

• Keep children away from batteries and acid.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-User PSI1000TX Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info