807483
9
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
9
LdU MODE: Load on/off based on the PV input voltage (Day and night):
LdU MODE: Load on/off based on the PV input voltage (Day and night): LdU MODE: Load on/off based on the PV input voltage (Day and night):
LdU MODE: Load on/off based on the PV input voltage (Day and night):
When the PV input voltage drops below 10V (during the night hours
or cloud cover) you can set the regulator to activate the output load
automatically. Press the enter button and the OFF/ON will flash.
Then use the up/down scroll button to change to ON. Press enter
button to set. The clock 1 screen will then appear.
Clock 1 screen
Clock 1 symbol is on. The default is sixty (60) minutes. This means
when the PV input voltage drops below 10V, sixty (60) minutes later
the load output will be activated. Clock 1 is a power on timer and can
be set from 0 to 120 minutes. Use the up/down scroll button to
change the minutes. Press enter button to set. The clock screen will
then appear.
Clock 2 screen
Clock 2 symbol is on. The default is thirty (30) minutes. This means
when the PV input voltage rises to 12.5V (morning time) after thirty
(30) minutes the output load will be shut off. Clock 2 is a power off
timer and can be set from 0 to 120 minutes. Use the up/down scroll
button to change the minutes. Press enter button to set . This will
then take you back to the LdU screen, Press enter to move to the
next screen.
Ld1 mode: Load on/obased on a set length of time:
Ld1 mode: Load on/obased on a set length of time: Ld1 mode: Load on/obased on a set length of time:
Ld1 mode: Load on/obased on a set length of time:
This allows you to set the load output to be active for a set length of
time. Press the enter button and the OFF/ON will flash. Then use the
up/down scroll button to change to ON. Press enter button to set.
The clock 1 screen will then appear.
Clock 1 screen
Clock 1 symbol is on. The default is three (3) hours. This means when
the PV input voltage drops below 10V, the output load will be active
for 3 hours. This can be set from 0 to 12 hours. Use the up/down
scroll button to change the minutes. Press enter button to set. The
clock 2 screen will then appear.
LOAD TIME SETTINGS
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pro-User SCP30 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info