Bedienungsanleitung Proficare BSR 3042 (Seite 43 von 70) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

814755

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

PC-BSR3042_IM 03.07.19

15 Stairway detection sensor

16 Drive wheel (left)

17 Air intake duct

18 Rubber lips

19 Drive wheel (right)

20 Stairway detection sensor

Remote Control (Figure C)

1 RESPOND button

2 START / PAUSE button

3 RANDOM button

4 AUTO button

5 FOCUS button

6 Direction buttons , , ,

Not Illustrated

Filter insert with mesh lter and HEPA lter

Notes for Use

• The appliance is operated via charged battery. Charge

the battery using the power adapter provided. Direct

power supply via power adapter is not possible.

• The appliance sucks up loose dirt through the nozzle.

For more efcient cleaning, the appliance is equipped

with a rubber lip.

• Do not use the appliance to vacuum building rubble.

• Dirty lters reduce the suction power of the appliance,

hence we recommend cleaning the dust container and

lters after each use.

• When the appliance hits a wall or other obstacles during

operation, it will change its driving direction.

• The appliance also cleans underneath furniture if they

have a ground clearance of at least 80 mm. If the appli-

ance gets stuck under a piece of furniture, a beep will

sound and the robot vacuum cleaner switches itself off.

• If the appliance is lifted during operation, it will emit

a beep and the power indicator light ashes red. The

appliance will then switch off.

• Due to its design, the cleaning of carpets and the driving

over edges is only possible to a limited extent. Short-pile

carpets with low edges can be surmounted. For long-pile

carpets, please use a conventional 230 V oor vacuum

cleaner.

• The sensors at the bottom of the appliance detect steps

and other dips, so that it can not drop down.

CAUTION:

Prior to each use, ensure the sensors are clean, or

else the appliance may crash.

Depending on the condition of the step (colour scheme,

design, etc.), it may happen that the sensors can still not

detect the landing. Especially near a stairway, please do

not leave the appliance unattended.

Before Using the Appliance

• Clear the oor of any objects lying around that could

obstruct the side brushes, get caught in the nozzle or

stop the appliance from cleaning.

• Remove any objects that could be knocked over (such

as vases, small lamps, decorative items, etc.).

• Make sure that no cables, cords or fringes, e.g. of

curtains, table cloths or carpets can be accessed. If nec-

essary, fold the edges with its fringes under the carpet.

The appliance may otherwise get entangled in it.

Putting into Service

Inserting Batteries into the Remote Control

(Batteries are not included in the scope of delivery)

1. Open the battery compartment cover on the back of the

remote control.

2. Insert 2 batteries of type R03 “AAA” 1.5 V, observing

the correct polarity (see markings on the bottom of the

compartment)!

3. Close the battery compartment cover.

WARNING:

Do not expose batteries to excessive heat such as sun-

light, re or similar. There is a risk of explosion!

CAUTION:

• Batteries may leak and lose battery acid. Remove the

batteries if the remote control is not being used for an

extended period of time.

• Different battery types or new and used batteries must

not be used together.

• Do not dispose of batteries along with domestic waste.

Return used batteries to the relevant collection facilities

or your retailer.

Mounting the Side Brushes

Please refer to gure B on page 3.

• Plug the side brush (10) with the imprint R into the

appliance at the inscription R below. It must engage with

a click sound.

• Plug the side brush (14) with the imprint L into the

appliance at the inscription L below. It must engage with

a click sound.

Charging the Battery

Before you can use the appliance, you must rst charge the

integrated rechargeable battery.

1. Plug the power adapter into a properly installed shock-

proof socket.

2. Make sure the appliance is switched off. (Main switch in

position )

3. Connect the appliance with the plug-in power adapter by

inserting the plug into the socket (6).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proficare BSR 3042 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info