Bedienungsanleitung Profile PIN-141 (Seite 5 von 12) (Holländisch)

566792

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

PIN-141 MANUAL

1. Overview

The multimeter is characterized as slim sized, portable, stable

performance and anti-dropping capacity. Using a 3½ digits LCD monitor it

offers clear readings.

The meters can be used to measure DC & AC voltage, DC current,

resistance, positive diode voltage fall, hFE parameters for transistor and

continuity and gives excellent performance and exquisite making as a

handy utility instrument.

2. Panel Layout

① LCD Display: 3½ digits, character 16mm high

② Data-hold Switch (HOLD)

③ Back Light Button Switch: Press this button to switch back light on

and off. If the battery is weak, the light will be dimmed.

④ Rotary Switch: use this switch to select functions and ranges

⑤ 10A -input Jack, COM -input Jack, V Ω mA -input Jack

3. Safety Information

a. The meter is designed according to IEC-1010 concerning electronic

measuring instruments with an over-voltage category (CAT Ⅲ) and

pollution degree 2.

b. Follow all safety and operating instructions to ensure that the meter is

used safely and is kept in good operating conditions.

c. Safety symbols:

important safety information, refer to the operating manual.

Dangerous voltage may be present.

Double insulation (protection Class II)

4. Special Cautions for Operation

a. The meter can be safe only according to standard procedures when

used in conjunction with the supplied test leads. Replace damaged test

leads only with the same model or same electric specifications.

b. To aviod risk of electric shock, do not use the meter without the cover

in place.

c. The range switch should be in the correct position for testing.

d. To avoid electric shock and damaging the instruments, the input

signals should not exceed the specified limits.

e. When measuring TV sets or power switches, attention should be paid

to the possible pulses that may bring destruction to the circuit.

f. The range switch position should not be changed at random during

measurement.

g. Take caution against shocks while measuring voltages higher than

60V DC & 30V AC.

h. The protection fuse should be replaced only with the same type and

same specifications.

5. GENERAL SPECIFICATIONS

a. Max Voltage between input terminal and earth ground: CAT

Ⅲ 600V

b. Over-range indication: the display will mark “1”.

c. Automatic display of negative polarity “-” .

d. Low Battery Indication: „ ‟ is displayed

e. Max LCD display: 1999 (31/2 digits)

f. Fuse protection: F-200mA/250V (Ø5x20mm)

g. Power Supply: 9V battery, 6F22 or NEDA 1604

h. Operating Temp.: 0°C to 40°C (relative humidity <85%)

i. Storage Temp.:-10°C to 50°C (relative humidity <85%)

j. Guaranteed precision Temp.: 23±5°C (relative humidity <85%)

k. Dimension: 143x75x32mm

l. Weight: approx. 200g (including battery)

6. Testing Specifications

Accuracy is specified for a period of 1 year after calibration and at 18°C to

28°C (64°F to 82°F) with relative humidity to 75%.

6-1 DC Voltage

range

resolution

accuracy

200mV

0.1mV

±(0.5% of rdg + 10 digit )

1mV

±(0.5% of rdg + 10 digits)

20V

10mV

±(0.5% of rdg + 10 digits)

200V

100mV

±(0.8% of rdg + 10digits)

600V

±(1.2% of rdg + 10 digits)

-- Input impedance: 10MΩ

-- Overload protection: 250V for 200mV range, effective DC or AC 600V

for other ranges

6-2 AC Voltage

range

resolution

accuracy

200V

100mV

±(1.2% of rdg + 20 digits)

600V

±(1.8% of rdg + 20 digits)

-- Frequency range: 40 to 400Hz

-- Response: average, calibrated in rms of sine wave

6-3 DC Current

range

Resolution

accuracy

200μA

0.1μA

±(1.0% of rdg + 20 digits)

2mA

1μA

20mA

10μA

200mA

100μA

±(1.5% of rdg + 20 digits)

10A

10mA

±(3.0% of rdg + 20 digits)

-- Overload protection: F 200mA/250V fuse

Note: 10A range: not fused, 10A up to 10 seconds

6-4 Resistance

range

Resolution

accuracy

200Ω

0.1Ω

±(1.5% of rdg +25 digits)

2KΩ

1Ω

±(0.8% of rdg +20 digits)

20KΩ

10Ω

±(0.8% of rdg +20 digits)

200KΩ

100 Ω

±(0.8% of rdg +20digits)

2MΩ

1KΩ

±(2.0% of rdg +25 digits)

-- over-load protection: 250V effective value

6-5 Transistor hFE Test

range

Test Range

Test Current / voltage

NPN & PNP

0-1000

Ib=10uA / Vce=3V

6-6 Diode Test

range

resolution

Function

1mV

Display: approximate forward

voltage of diode

-- over-load Protection: 250V effective value

-- forward DC current: approximate 1mA

-- Reversed DC voltage: approximate 3.0V

6-7 Continuity

range

Function

Built-in buzzer will sound if resistance is lower

than 80Ω

-- over-load protection: 250V effective value

-- open circuit voltage: approximate 3.0V

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Profile PIN-141 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info