Bedienungsanleitung Proteus BC-81090 Monitor (Seite 2 von 4) (Englisch)

462456

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

B. Clock and Date Setting:

1. After power on the monitor, the top of the LCD will display “

12:00

” and the

hour display will flash.

2. Press ♁ or \ button to set up the hour value and then press the ENTER button to confirm

your setting value.

3. Minute display will flash. Press ♁ or \ button to set up the minute value and then press the

ENTER button to confirm your setting value.

4. The Letter of E will flash. It is means the language is English. Press ♁ or \ button to choose

the language you prefer to use. E means English; D means German; F means French; I means

Italian; S means Spanish; A means USA. The indication of date is Month-Day-Year in USA and

the others are Day-Month-Year.

5. The year display will flash. Press ♁ or \ button to set up the year value and then press the

ENTER button to confirm your setting value.

6. The month display will flash. Press ♁ or \ button to set up the month value and then press

the ENTER button to confirm your setting value.

7. The day display will flash. Press ♁ or \ button to set up the day value and then press the

ENTER button to confirm your setting value.

8. The display will go to the program 1.

Note:

If you would like to set alarm, cancel alarm or change clock and date setting, press the ♁ or \

button in the stop mode and go to the clock setting program. This program is located behind of the

program 12 and the window will show SET.

a. Hold the START/PAUSE button two seconds to enter the alarm setting. The operating

procedure is same as the clock setting above.

b. Press the START/ PAUSE to choose with alarm or without alarm function. With alarm

function, the window will display the bell picture. Without alarm function, the bell picture will

disappear from the window.

c. Hold the ENTER button two seconds to enter the clock and date modify function. The

operating procedure is same as the clock above.

Note: When take off the adaptor will clear the data of clock and date.

C. KEY BOARD:

1. MODE : Change the display of Speed & Cal. Functions to RPM & Performance value functions,

and keep the other functions as the same.

2. ENTER : During PAUSE mode, press ENTER key to enter Time or Age setting (only in 11

program).

3. START/PAUSE : To start or pause exercising.

Hold this button for 2 seconds can enter initial mode & reset all value to zero.

4. ♁ : Selects Program or sets up the values of load level, time and age. Or set up the values of

clock, date and alarm.

5. \ : Selects Program or sets down the values of load level, time and age. Or set up the values of

clock, date and alarm.

D. FUNCTION OF OPERATION:

This system contains of 12 different programs and you can preset the workout time and system will

divide the time by 10 intervals. If you don’t preset workout time, system will cont up the workout

time in one-second increment. Without setting the workout time, the time will count up and each

interval will retain 3 minutes.

1. DETAIL OPERATION OF PROGRAM 1

~ PROGRAM 10

a. To enter the initial mode, press the START/STOP key for over 2 seconds.

b. Then press ♁ or \ key to choice the exercise program you prefer. The profile will be

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proteus BC-81090 Monitor Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info