21
Lay the cut piece down or clamp it safe-
ly!
Check the safe position of the movable
supply!
Use only sharp and proper chains!
Guide chain reglet can be slitted to both sides
max. by 60°.
Make the adjustment in the following way:
First step:
Picture 2
- Release the fastening nut (picture 2, pos. 1)
and fit the machine into the required angle po-
sition of the cut.
- Check the right posititon of the angle on the
scale.
- Fasten the fastening nut firmly.
Second step:
- Set up the cut indicator (picture 2, pos. 2) to
the adjusted angle of the cut. Use the scale on
the label (picture 2, pos. 3 and picture 3), whe-
re the picture symbol corresponds with the
real slitting of the chain reglet under the
sleigh.
Picture 3
Third step:
Picture 4
- Line of the cut indicator (picture 2, pos. 2)
shows to "cut edge" of the chain. Cutting off
will be performed according to the set angle.
Do not ever cut without the guide ruler!
Example:
First step: Adjustment of the machine to 30°
Picture 5
Angle adjustment of the
bevel cut
1
2
3
4
1
2
3
4
kniha_Narex_CPP380.book Seite 21 Mittwoch, 31. Oktober 2001 11:53 11
