23
Guide chain reglet can be slitted lengthwise back
by 10° including the protective reglet. This adjust-
ment is used especially when more layers lying on
each other are cut at the same time. It avoids
pressing the tool and uneven cut.
Before you start to adjust the machine
pull the plug of the movable supply out
of the socket!
Picture 9
- Release easily both fastening screws on the
back side of the machine with spanner 6 (pic-
ture 9).
- Slit the chain reglet back and fasten firmly fa-
stening screws.
By releasing the fastening screws the
machine becomes untight and a slight
leak of oil can occur. Perform the adju-
stment without any useless time
delays.
The tool set of the chain saw CCP 380 has spaces
between links of the chain 3/8" and thickness of
the chain links 1,3 mm. Usage of other tool sets is
conditioned by explicit agreement of the producer
of the machine.
The complete cut tool set consists of:
a) Chain wheel
b) Guide chain reglet
c) Chain
d) Protective reglet with protective shield
The space between the links of the
chain must correspond to the space of
the chain wheel and the space of the
pulley of the guide chain reglet. The
length of the protective reglet must be
adjusted to the length of the guide
chain reglet. Usage of mutually non-ad-
justed components is not allowed!
Pull the plug of the movable supply out
of the socket!
Warning! Danger of injury from cut ed-
ges of the chain!
Warning! Danger of injury from sharp
edges of the guide chain reglet!
Picture 10
- Set the machine into the basic position 0° and
take off the front protective shield (picture 10,
pos.1).
- Release both clamping nuts (picture 10,
pos.2) of the guide reglet Release the stret-
ching of the chain with the help of a screw-
driver and stretching screw (picture 10, pos.3)
Take off both clamping nuts.
- Slip the chain over the chain wheel and take it
off together with the guide reglet.
Lengthwise slitting of the
chain reglet
Tool
Replacement of the chain
and the guide chain reglet
2
3
4
1
kniha_Narex_CPP380.book Seite 23 Mittwoch, 31. Oktober 2001 11:53 11
