Bedienungsanleitung Protool DWC 18-2500 DEC (Seite 21 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

490654

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

EU only: European Directive 2006/66/EC

stipulates that faulty or used battery packs/

batteries must be recycled.

Do not throw the power tool in your house-

hold waste! Dispose of machines, accesso-

ries and packaging at an environmentally

responsible recycling centre. Observe the

valid national regulations.

EU only: European Directive 2002/96/EC

stipulates that used electric power tools

must be collected separately and disposed

of at an environmentally responsible recy-

cling centre.

Information on REACh:

www.protool-online.com/reach

14 Warranty

For our tools, we give warranty for material

and production defects in accordance with

the locally applicable legal provisions, but

in any case for at least 12 months. Within

the EU member states, the warranty period

is 24 months (veriﬁ cation through invoice

or delivery note).

Damage caused by, in particular, natural

wear, overloading, incorrect handling, or

damage caused by the operator, or dam-

age caused through use of the equipment

contrary that speciﬁ ed in the Operating In-

structions, or damage which was known at

the time of purchase, is not covered by the

warranty. Furthermore, damage caused by

the use of non-original PROTOOL accesso-

ries and consumable material (e. g. sanding

pads) is also excluded.

Complaints can only be recognised if the

tool is returned while still assembled to the

supplier or an authorised PROTOOL Cus-

tomer Service workshop. Keep the Operat-

ing Instructions, Safety Instructions, Spare

Parts List and purchase receipt in a safe

place. Otherwise the respective, current

warranty condi tions of the manufacturer

shall apply.

Note

Due to continuous research and develop-

ment work, we reserve the right to make

changes to the technical content of this

documentation.

15 EU Declaration of

Conformity

Cordless drywall

screwdriver

Serial no.

DWC 18-2500 DEC 497488

DWC 18-4500 DEC 10003043

We declare under our sole responsibility

that this product is in conformity with the

following standards or standardization doc-

uments:

EN 55 014-1, EN 55 014-2, EN 60 745-1,

EN 60 745-2, EN 61 000-3-2, EN 61 000-3-3,

EN 50 366 according to the provision of the reg-

ulations stipulated in Directive 2006/42/EC,

2004/108/EC, 2011/65/EU (from

03.01.2013).

Charger Serial no.

BC 3 494945

We declare under our sole responsibility

that this product is in conformity with the

following standards or standardization doc-

uments:

EN 60 335-1, EN 60 335-2-29, EN 55 014-1,

EN 55 014-2, EN 61 000-3-2, EN 61 000-3-3,

EN 50 366 according to the provision of the reg-

ulations stipulated in Directive 2006/95/EC,

2004/108/EC, 2011/65/EU (from

03.01.2013).

Dr. Johannes Steimel

Head of Research, Development and

Technical Documentation

Festool Group GmbH & Co. KG

Wertstr. 20

D-73240 Wendlingen, Germany

04.07. 2012

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Protool DWC 18-2500 DEC Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info