Bedienungsanleitung Protool MXP 1200 (Seite 14 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

490693

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Operating with electric generator (EG) with

combustion motor drive

NOTE

► The manufacturer of the stirrer does not pro-

vide any guarantee for incorrect operation of

the stirrer with any EG.

The stirrer can be operated with an EG if the fol-

lowing conditions are met:

- The output voltage of the EG must always be

within the range of 230 VAC ±10%, the EG must

be equipped with Automatic Voltage Regula-

tion (AVR). The stirrer must not work correctly

without this regulation and may also become

damage.

- The power of the EG must be at least 2.5 times

greater than the connected load of the stir-

rer (i.e. 2.5 kW for MXP 1000/1002, 3 kW for

MXP 1200)

- If you operate using an EG that does not have

sufﬁ cient power, the speed may ﬂ uctuate and

the power of the machine may decrease

6.8 Stationary use

The stirrer can be clamped into the MSP 57 PRO-

TOOL stirrer stands at the 57 mm collar [1-6].

6.9 Suction

CAUTION

Inhaling the dust may damage the respira-

tory tract.

► When working with dust, you must wear res-

piratory protection and connect the machine

to the suction attachment.

To extract dust from the mixing container, you can

connect it to the PROTOOL MXP suction attach-

ment.

7 Service and maintenance

CAUTION

Never use a machine that is damaged in any

way! (Damage also includes a ripped or worn

ﬂ exible switch protection or clamping ring

protection on the ErgoFix adapter).

► Have a damaged machine repaired in an au-

thorised PROTOOL workshop.

- To ensure safety against an accident caused by

electrical current and to retain the protection

level, this work must be carried out in an elec-

trical engineering workshop that is authorised

to carry out such repairs.

- The ventilation holes on the motor hood must

not be blocked.

- The machine automatically switches off if the

carbon brushes are worn. The machine must

be sent to the workshop for maintenance work

(see the supplied list).

- We recommend that you clean the machine reg-

ularly. Remove any dust, residual mixing mate-

rial and any other dirt. If you use solvent-based

cleaning agents, these may damage the painted

surfaces or the plastic parts. If you use these

cleaning agents, we recommend that you test

the effect of these agents on a small, concealed

area. The ventilation holes on the motor hood

must not be blocked.

- Commission an authorised workshop to

change brushes, the power cable etc.. If

the machine is knocked in any way, it is also

necessary to entrust an authorised workshop

in order to prevent any mechanical or electrical

danger arising.

- The packaged machine can be stored in a dry

place without heating as long as the inside tem-

perature does not fall below −5 °C. The unpack-

aged machine must only be stored in a dry,

enclosed space where the temperature does not

fall below +5 °C and where no extreme tem-

perature ﬂ uctuations occur.

8 Service

See enclosed sheet.

9 Environmental

Protection / Disposal

Power tools, accessories and packaging should be

sorted for environmental-friendly recycling.

Only for EC countries:

Do not dispose of power tools into house-

hold waste!

According to the European Directive 2002/96/EC

on waste electrical and electronic equipment and

its incorporation into national law, power tools that

are no longer suitable for use must be separately

collected and sent for recovery in an environmen-

tal-friendly manner.

REACh

REACh is a European Chemical Directive that

came into effect in 2007. As “downstream users”

and product manufacturers, we are aware of our

duty to provide our customers with information.

We have set up the following website to keep you

updated with all the latest news and provide you

with information on all the materials used in our

existing products:

http://www.tts-protool.com/reach

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Protool MXP 1200 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info