Bedienungsanleitung Protool RGP3 (Seite 7 von 63) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

490678

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Tool Specifications

Renovation Grinder RGP 3

Power consumption 750 W

No-load speed 18 500 / 15 000 min

-1

Grinder spindle threads M 4 (left-hand)

Circumferential speed 35 m · s

-1

Grinding disk dia. 2 x 44 mm, 1 x 35 mm

Total weight 2,6 kg

Protection class II /

Controls Elements

1 Spindle locking button

2 Vacuuming hood

3 On/Off switch

4 Auxiliary handle

5 Brush insert

6 Torx screw

7 Grinding tool

8 Screw

9 Torx key

10 Vacuum opening

Abgebildetes oder beschriebenes Zubehör gehört

teilweise nicht zum Lieferumfang.

Noise/Vibration Information

Measured values determined according to

EN 50 144.

Typically the A-weighted noise level of the tool are:

Sound pressure level: 96 dB (A).

Sound power level: 109 dB(A).

Wear ear protection!

The typical weighted acceleration is 5,2 m/s

Intended Use

The machine is intended for the removal of plaster,

paint, adhesive residue, coatings, and rust as well as

the cleaning of concrete, metal and wood surfaces.

The machine may be used only for dry grinding.

Notes on Safety Prevention

Safe operation of this machine is pos-

sible only when the operating instruc-

tions and the safety precautions are

read completely and the instructions

contained therein are strictly

observed.

❑

For further notes on safety refer to enclosed

Sheet.

❑

The machine is not qualified for operation in

environments where danger of explosion exists.

❑

Always inspect cable and plug before using

machine. Only have damage repair by a qualified

professional.

❑

For work outdoors, use only extension cables

and coupling plugs that are certified for such use.

❑

The dust generated when working is injurious to

health. Use dust vycuuming and wear dust pro-

tection masks when working.

❑

Do not work with material containing asbestos.

❑

When grinding metal, saprks are genrated.

Because of the danger of fire, no combustible

material must be present in the area of flying

sparks.

❑

Provide for secure footing when working.

❑

Always place the cable to the rear away from the

machine.

❑

Apply the machine to the material to be worked

only after it has been switched on.

❑

Wear protective goggles and ear protector

❑

The machine must not be used when damp and

must not be operated in a wet environment.

❑

Clamp the workpiece securely in case it does not

remain in position from its own weight.

❑

Do not carry the tool by the power cord.

❑

Put the plug into the main socket only when he

machine is switched off.

❑

Always remove the plug from the power supply

socket before carrying out any work on the

machine.

❑

Use only grinding tools whose allowable speeds

are at least as high as the highest no-load speed

of the machine.

❑

Press the spindle locking button only when the

grinder spindle is at a standstill.

❑

Persons under 16 are not permited to use the

appliance.

RGP 3 - GB Seite 7 Freitag, 16. Juli 1999 11:15 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Protool RGP3 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info