490678
9
Zoom out
Zoom in
Vorherige Seite
1/63
Nächste Seite
9
Application Table
The information given here are recommendations.
The optimum combination is best determined with
practical trials.
a
- Grinding plate with diamond
coating
b
- Grinding plate with hard metal
content FINE
c
- Grinding plate with hard metal
content ROUGH
d
- Grinding plate with silicium-
carbide content
Storage
The unit should be stored in a dry place where it is
protected against freezing.
Environmental Protection
Do not open worn out machines and return to the
collection facilities provided for recycling.
Maintenance
The ventilation slots (3) on the motor casing
should be cleaned out from time to time.
Maintenance and repair work that requires the
opening of the machine may be performed only
by an authorised customer service workshop.
When the carbon brushes are worn out, the
machine switches itself off. The machine must
then be sent to customer service for maintenance
(see enclosed sheet).
Service
See enclosed sheet.
Guarantee
We guarantee PROTOOL appliances in accordance
with statutory/country-specific regulations (proof
of purchase by invoice or delivery note).
Damage attributable to normal wear and tear, over-
load or improper handling will be excluded from the
guarantee.
In case of compliant please send the machine,
undismantled, to your dealer or the Service Centre
for electric power tools.
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents: EN 50 144,
EN 55 014, EN 60 555, HD 400 according to the
provisions of the regulations 73/23/EEC,
89/336/EEC, 89/392/EEC.
Dr.ÊJosefÊLorenz
PROTOOL, Narex ‰esk‡ L’pa A.S.
47037 ‰esk‡ L’pa
Subject to change
Grinding Plate Application
abcd

Grinding of overhangs and unevenness
on poured flooring

Removal of unevenness and form transi-
tions on exposed concrete

Grinding of soiled and weathered con-
crete surfaces

Rounding the edges of concrete parts

Grinding of cement facing

●●
Roughing or grinding off of plaster
●●
Removing of oil paint from plastered sur-
faces
●●
Grinding off of bituminous and concrete
paints
●●
Removing of coatings and elastic paints
(e. g. cellar stairs, furnace rooms, balco-
nies, etc.)

Removing of epoxy resin from cement
and poured flooring surfaces

Removing of paint and rust from metal
parts

Grinding and roughing of flat surfaces on
tiles
●●
Grinding off of tile adhesive and mineral
adhesive residues
RGP 3 - GB Seite 9 Freitag, 16. Juli 1999 11:15 11
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Protool RGP3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info