Bedienungsanleitung Protool SBP 285 (Seite 8 von 61) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

490706

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

Safety instructions

Technical data

Operating controls & Description

Intended use

Type reference SBP 285

Rated voltage

Cutting height

Cutting depth

Drive wheel diameter

Saw band - Length

- Width

Guide plate

Motor specification synchronous, Protection Class IP44 1-phase AC 3-phase AC

Cutting speed

Power supply cord for option

Plug for option 2-pole with earthing round system 16 A,

5-pin contact

Weight of the electric tool

285 mm

230 mm

200 mm

1 710 mm

6-25mm

240 x 340 mm

1,6 kW, S4 - 30%

1 400 min

900 m/min

H07 RN-F 3 G 1,5

19 kg 19 kg

-1

230V~ 400V~

230 mm

200 mm

240 x 340 mm

-A

900 m/min

H07 RN-F 4 G 1,5

285 mm

1 710 mm

6-25mm

1,3 kW, S3 - 30%

1 400 min

-1

1 Retaining spring of the guard

2 Retaining spring of the guard

3 Hand nut for saw band tensioning

4 Wing screw for guide wheel adjustment

5 Locking nut

6 Guide pin for saw band guidance

7 Guide sleeve for saw band guidance

8 Wing screw of the saw band guide

9 Safety guard, upper

10 Safety guard, lower

11 Selector-switch lever

12 Switch lock-off button

The accessories shown or described in this Operating

Manual may not be included as a part of delivery.

Handy, portable band saw intended for one-man

operation, for universal application on timber yards and

construction sites. Thanks to the design with guide

plate and laterally offset handle, together with the

powerful motor, this saw is suitable for profiling of rafter

ends and similar jobs.

The range of applications and operation modes may be

extended by using the accessories listed in this

Operating Manual.

The user is solely liable for damage and accidents

caused by improper use of the product.

For safe work with this electric tool and prevention of

injury, it is imperative to follow all generally accepted

safety principles and regulations for prevention of

accidents, and read the enclosed "Safety instructions"

thoroughly.

The manufacturer disclaims liability for damages

caused by unauthorized modifications or using other

than the supplied or specified accessories with the

electric tool.

This electric tool may only be used, maintained and

repaired by the people who have received the

relevant instructions. These people must have

reached the minimum age legally required. For safe

work and familiarizing with all the remaining risks,

they must have read and understood this Operating

Manual.

1. For maximum safety of work with this electric

tool, read this Operating Manual carefully and

observe all the instructions given herein.

2. Follow the safety instructions supplied

separately as a part of delivery with each

electric tool.

3. The electric tools shall not be used in damp or

wet locations, outdoors in the presence of rain,

fog, snow, or if there is a risk of fire or

explosion.

4. Check the power supply cord and plug before

each use of the electric tool. Have any defect

repaired by a professional service workshop.

5. Remove plug from the mains before performing

any work on the electric tool.

6. Only insert plug in the mains socket when the

electric tool is switched off by the mains switch.

7. When working outdoors, use exclusively the

extension cords and cable connectors attested

for outdoor use.

8. Never brake the saw band to a stop by applying

side pressure after switching off.

9. Only use properly sharpened saw bands which

are suitable for the intended work.

10. The use of saw bands showing cracks or

deformations is strictly prohibited.

11. Alignment of saw bands shall not be carried out

while the electric tool is still running.

12. Never work without the wheel guards.

13. Damaged power supply cords must be replaced

immediately by a specialist.

14. Unauthorized use of this product anyway may

lead to a personal injury.

15. Repairs shall be carried out by the qualified

personnel only.

16. Use only the original spare parts.

17. Use safety glasses and ear protection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Protool SBP 285 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info