Bedienungsanleitung Protool VCP 260 E L (Seite 17 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

70266

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

- Do not damage the mains power cable

(e.g. by driving over, dragging, etc.).

Protect from heat, oil and sharp edges.

Do not pull the plug from the socket by

the cable.

- Check the plug and the cable regularly

and have them replaced by an authorised

service workshop should either become

damaged cable with the type speciﬁ ed in

the spare parts list. Always replace the

mains power cable with the type speciﬁ ed

in the spare parts list.

- Do not expose the machine to rain.

- The machine should only be used by ap-

pointed persons instructed in correct ma-

chine handling.

- Before use, operators shall be provided

with information, instruction and train-

ing for the use of the machine and the

substances for which it is to be used, in-

cluding the safe method of removal and

disposal of the material collected.

- For reasons of safety, never operate the

machine from an unearthed socket.

- Always use the machine socket for the

purpose speciﬁ ed in the manual.

- Always use original PROTOOL accesso-

ries.

- Pull the plug from the socket when the

machine is not in use and prior to main-

tenance and cleaning work.

- Do not lift or transport the machine by

the handle using a crane or lifting gear.

6 Operation

WARNING

Unauthorised voltage or frequency!

Risk of accident

The mains voltage and the frequency of

the power source must correspond with

the speciﬁ cations on the machine’s name

plate.

6.1 Initial operation

Open the locking clips [2-2] and remove the

top section of the machine [2-1].

Remove the accessories from the dust con-

tainer [2-3] and the packaging!

Insert the sealing plug [1-15] into the suc-

tion opening [1-1] (for dust class M only).

Insert a ﬁ lter or disposal bag in the dirt trap

(see chapter 7.6 and 7.7).

Replace the top section [2-1] and close the

locking clips [2-2].

Fit the accessory box to the back of the

vacuum cleaner.

Connect the suction hose to the machine.

Accessory box

Hook the accessory box onto the upper

section [2-1] and fasten in place with two

screws [2-5].

The accessory box is equipped with a pipe

holder which has space for three pipes.

If the pipe holder is not needed, it can be

removed without the use of tools: Lift the

latch, tip the pipe holder backwards and

remove it – see ﬁ gure [2].

The suction pipe with the ﬂ oor tool ﬁ tted

can be easily stored in the groove on the

accessory box. The adapter on the pipe

must be fastened in the correct position

– see ﬁ gure [2].

6.2 Switch on/off

► Insert the plug into an earthed socket.

WARNING

Risk of injury from tools starting up

unexpectedly

Before setting the switch to the “AUTO” or

“MAN” position, make sure that the con-

nected tool is switched off.

The switch [1-9] serves as an on/off switch.

Switch position “0”

Appliance socket [1-3] is disconnected from

the power, mobile dust extractor is switched

off.

“MAN” switch position

Appliance socket [1-3] is connected to the

power, the mobile dust extractor starts.

“Auto” switch position

Appliance socket [1-3] is connected to the

power, the mobile dust extractor starts

when the connected tool is switched on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Protool VCP 260 E L Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info