Bedienungsanleitung Protool VCP 480E-M (Seite 20 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

490621

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

8.3 Extracting ﬂ uids

Before extracting ﬂ uids, remove the ﬁ lter

or disposal bag (see chapters 7.6, 7.7). We

recommend using a special wet ﬁ lter.

The dust extractor stops automatically when

the maximum level is reached.

CAUTION

Escaping foam and ﬂ uids

► Switch off the machine immediately and

empty the dirt trap.

8.4 The antistatic system

Friction inside the extraction hose causes

static electricity to develop during extrac-

tion. Operating personnel may receive un-

pleasant electric shocks while working. The

mobile dust extractor is ﬁ tted with an anti-

static system as standard to discharge any

static electricity that may develop. How-

ever, always use the enclosed antistatic

extraction hose.

8.5 After ﬁ nishing work

Switch off the mobile dust extractor and

disconnect the plug.

Clean the main ﬁ lter automatically or man-

ually (see chapter 8.1).

Empty the dust container.

Wind the cable around the raised area on

the accessory box. Clamp the end of the

cable in the groove – see ﬁ gure [10].

Fold the hose clip upwards. Wind the hose

around the suction coupling and the bracket

of the hose clip. Slide the end of the hose

over the bracket.

CAUTION

Hazardous dust

Damage to the respiratory passage

Wipe down the mobile dust extractor and

clean all accessories thoroughly using the

extractor (inside and out) before removing

from the working area.

Parts that you were not able to clean thor-

oughly must be sealed in an airtight plas-

tic bag prior to transportation.

Wear a dust mask!

The machine shall be stored indoors

only.

► Place the mobile dust extractor in a dry

room inaccessible to unauthorised us-

ers.

9 Service and maintenance

WARNING

Risk of injury, electric shock

Always disconnect the mains plug from

the socket before performing maintenance

work on the machine!

All maintenance and repair work which

requires the motor housing to be opened

must only be carried out by an authorised

service workshop.

Damaged safety devices and components

must be repaired or replaced in a recog-

nised specialist workshop, unless otherwise

indicated in the operating manual.

Observe the following instructions:

- A dust test must be performed at least

once a year by the manufacturer or an

instructed person. This test may include

checks to determine whether the ﬁ lter is

damaged, the machine is sealed properly

and the monitoring features are function-

ing correctly.

- During maintenance and repair work,

all components that cannot be cleaned

satisfactorily must be replaced. The old

components must be sealed in imper-

meable plastic bags prior to disposal in

compliance with applicable regulations

for this type of waste.

- For user servicing, the machine must

be dismantled, cleaned and serviced, as

far as is reasonably practicable, without

causing risk to the maintenance staff and

others. Suitable precautions include, de-

contamination before dismantling, provi-

sion from local ﬁ ltered exhaust ventila-

tion where the machine is dismantled,

cleaning of the maintenance area and

suitable personal protection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Protool VCP 480E-M Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info