Bedienungsanleitung Proxxon LHW (Seite 13 von 78) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch, Schwedisch)

782216

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

- 13 -

• Take breaks if necessary when working with the device!

Commissioning and operation

General handling of the device:

CAUTION!

• Do not work with damaged or worn bits and cutters!

Make sure the tools are in perfect condition. Damaged

or worn tools can break and cause injuries!

• Never press the lock button if the bits and cutters and

are still rotating.

• Please note: The utilised bits and cutters may not ex-

ceed a maximum diameter of 50 mm!

• Make sure that the permissible maximum speed of the

bits and cutters does not undershoot the speed of the

device! The tool can break when the maximum per-

missible speed is exceeded. Flying parts can cause

damage and severe injuries!

• Never work without dust protection mask and safety

glasses. Some dusts have a hazardous effect! Materi-

als containing asbestos may not be machined!

• Do not work with damaged tools!

• Ensure the work piece is fixed securely! Loose work

pieces should be clamped in a suitable fixture. This

prevents the work pieces from flying about.

• A correct and uniform speed achieves a high grinding

performance, not excessive contact pressure! Exces-

sive pressure is to be avoided: it only stresses the de-

vice and can even damage the bits and cutters!

• Hold the device without covering the ventilation slots.

If it overheats, you absolutely must shut off the device

and allow it to cool down.

• Do not use the cutting disc for rough-machining. Risk

of fracture!

• Work only with a correctly adjusted protective guard!

• When storing the bits and cutters, make sure they are

reliably protected from damage!

Hold the device by the insulated gripping surfaces, as

the grinding surface can hit its own connecting cable.

Damage to a “live” wire can stress metal parts and

cause an electric shock.

Replacing the Grinding Disc

Your LHW long-neck angle grinder is ready for opera-

tion on delivery.

Pre-assembled with a fan sander with grain 100 and 50

mm diameter, ideal for grinding and smoothing mal-

leable cast iron, grey cast iron, stainless steel, steel,

non-ferrous metal, wood and plastic.

The supplied high-grade corundum sanding disc is ideal

for roughing, grinding, sharpening and removing rust

from metal or non-ferrous metal, and the included

corundum-bound cutting disc is perfect for abrasive

cutting of steel, non-ferrous metal, plastic or wood.

We also have a great number of additional problem

solvers in our comprehensive range of accessories.

1. Press the locking button 1 (Fig. 2).

2. Turn the fastening screw 4 using an Allen key 5 un-

til the locking button engages.

3. Undo the fastening screw 4, remove the centring

disc 3 and the grinding disc 2.

4. Fit a new grinding disc.

5. Press the locking button 1 and tighten the fasten-

ing screw 4.

Adjust the protective guard.

IMPORTANT!

Disconnect the plug from the mains before the follow-

ing.

1. Release fastening screw 1 (Fig. 3) and turn the

protective guard to the desired position.

2. Retighten the fastening screw.

Using the unit

1. Switch the unit on via the switch 3 (Fig. 1).

NOTE!

Do not press too hard when using the grinder. Good

grinding performance can only be achieved using the

correct and constant rotational speed.

To achieve the best results when roughening, apply

the grinding disc to the grinding surface at an angle

of between 30° and 40° and move evenly back and

forth over the workpiece.

Do not bend the grinding disc into the cutting surface

during cutting work.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proxxon LHW Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info