Bedienungsanleitung Proxxon PD 250-E (Seite 5 von 26) (Englisch)

782206

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

-5-

Contents

Page

Foreword5

Safety regulations 5

Legend 7

Description of the machine 7

Technical data 7

Installation and setting up 8

Switching on the machine 8

Operating the handwheels 8

Switching on the automatic feed 8

Working with the tailstock 9

Selecting the turning tool 9

Inserting the turning tool in the tool holder 9

Setting the spindle speeds 9

Calculating the maximum spindle speed 9

Clamping the work piece in the lathe chuck 10

Turning the jaws of the lathe chuck 10

Longitudinal turning 10

Face turning 10

Taper turning 10

Cutting offawork piece 10

Machining longer work pieces with tailstock and centre11

Fitting change gears for thread cutting 11

Thread cutting with the turning tool 11

Thread cutting using the top slide 12

Cutting left threads 12

Accessories for Lathe PD 250/E 12

Installing the centrelathe (No.24014) 12

Four-jaw chuck (No. 24036) 12

Fastening the drill chuck (No. 24020) 13

Fixed steady (No. 24010) 13

Careand Maintenance 13

General 13

Setting the guide play 13

Spareparts list 14

Foreword

Dear Customer,

By purchasing your PROXXON Lathe PD 250/E, you have chosen

agood-quality,high-grade machine. The latest production and

testing methods guarantee ahigh level of reliability for this

machine.

This instruction manual covers:

•safety regulations

•operation and maintenance

•spareparts list

Please read carefully!

Using this instruction manual will

•make it easier for you to get used to the machine,

•help prevent faults occurring due to improper use and

•increase the service life of your machine.

Keep this instruction manual in an easily accessible place.

Only operate this machine if you arequalified to do so and follow

the guidelines in this instruction manual.

PROXXON does not accept responsibility for the safe functioning

of the machine

•i

fitishandled in amanner which constitutes improper use,

•ifitisused for other purposes which arenot specified in the

instruction manual,

•ifthe safety regulations arenot observed.

Warranty claims areinvalid if

•the machine is incorrectly operated,

•the machine has not been sufficiently maintained.

In the interests of your safety,please always observe the safety

regulations.

Only use genuine PROXXON spareparts.

We reserve the right to make further alterations for the purpose of

technical progress.

We wish you every success with your machine.

Safety regulations

IMPORTANT

•Ensurethe workplace is tidy.

•Check the unit for damage beforeuse.

•(connection cable, protective devices, etc.), have defective

parts replaced by qualified personnel.

•This unit corresponds to the pertinent safety regulations.

Repairs (e.g., replacement of the power supply lead) may only

be performed by aqualified electrician.

•Never work without the safety equipment fitted.

•Donot use electrical power tools in the rain, in damp surroun-

dings or in the vicinity of flammable liquids or gases.

•Only use the tool when the handle is dry and free from grease.

•Avoid contact with earthed components, e.g., pipes, radiators,

ovens and refrigerators.

•Protect the connection lead from heat and sharp edges and

route it so it cannot be damaged.

•Donot remove the plug from the socket by pulling on the cable.

•Donot pick up the unit by the cable.

•Keep children and thirdparties away from the workplace.

•Keep tools in childsafe locations when not in use.

•Donot overload the tool.

•

Do not use the tool to perform operations for which it is not suitable.

•Replace blunt tools in good time.

•

Visually inspect application tools to ensurethey areingood

working order and suitable for the task prior to setting up the job.

•Fasten tools securely.

•Clean the unit thoroughly following all work.

•Disconnect the plug from the power supply when the unit is not

in use, beforeperforming maintenance, tool replacement or

repair work.

•Only plug the unit in when the unit is switched off.

•Always wear protective goggles (danger of tool breakage).

•Ifnecessary,wear aprotective dust mask.

•Only use appropriate working clothes (no loose sleeves, ties,

jewellery).

•Wear ahair net if you have long hair.

•Only use accessories and spareparts recommended by

PROXXON.

•Observe the max. permitted rotational speed.

•Ifnecessary,use dust extract equipment.

•Donot use the tool when you aretired or under the influence of

alcohol.

•Keep fingers away from rotating or fast moving tools

(saws, etc.).

•Keep the operation instructions in asafe place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proxxon PD 250-E Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info