Bedienungsanleitung Proxxon TG 125-E (Seite 11 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch, Schwedisch)

782214

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

- 11 -

Translation of the Original Operating Instruc-

tions TG 125/E disc grinding machine

Contents:

1 General view (fig. 1) 11

2 Description of the machine 11

3 Scope of delivery 12

4 Technical data 12

5 Before work 13

5.1 Setting up your disc grinding machine

(fig. 2): 12

5.2 Removing and inserting the grinding

table (fig.3): 13

5.3 Affixing and replacing grinding wheels

(fig. 4): 13

5.4 Adjusting the grinding table angle

(fig. 5): 14

5.5 Connecting the dust exhaust

(fig. 6): 14

6 Working with the TG 125/E disc

grinding machine 14

6.1 Working with the angle stop (fig. 7): 14

6.2 Notes on grinding speed 15

7 Care and maintenance 15

8 Disposal 15

9 CE conformity declaration 15

Dear customer!

Using these instructions

• makes it easier to get familiar with the device

• prevents malfunctions caused by improper han-

dling, and

• lengthens the service life of your device.

Please keep these instructions readily accessible at

all times.

Use the device only when you have understood it

exactly and always adhere to the instructions.

PROXXON is not liable for the safe functioning of the

device in cases of:

• handling that does not conform to the usual usage,

• purposes of use not designated in the instructions,

• disregard of the safety instructions.

You are not entitled to guarantee claims in cases of:

• operator errors,

• inadequate maintenance.

For your own safety, please follow the safety instruc-

tions exactly.

Use only genuine PROXXON replacement parts.

We reserve the right to make improvements in the

sense of technical progress. We wish you much suc-

cess with the device.

WARNING!

Read all safety warnings and instructions.

Failure to follow all safety warnings and

instructions listed below may result in electric shock,

fire and/or serious injury.

KEEP ALL SAFETY WARNINGS AND

INSTRUCTIONS FOR THE FUTURE!

Do not use damaged bits and cutters. Before each

use, inspect bits and cutters such as sanding

discs for chips and cracks, grinding discs for

cracks, strong wear or tear. After you have

inspected and installed the bits and cutters, keep

yourself and any other persons in the vicinity

away from the plane of the rotating bits and cut-

ters and run the device at maximum rotational

speed for one minute. Damaged bits and cutters

usually break during this test time.

1 General view (fig. 1)

1. Grinding disc

2. Swivel-mounted grinding table

3. Rotary knob for speed control

4. On-off switch

5. Angle stop

6. Mains cable

7. Connecting piece

8. Guide slot for angle stop

9. Clamp

10. Locking button for angle adjustment

11. Grinding discs

13. Rubber connector

2 Description of the machine

Thank you for purchasing the TG 125/E disc grinding

machine. You now own a high-precision machine to

use in grinding work for which complete accuracy is

required.

A high-precision manufactured and carefully bal-

anced grinding disc with double ball-bearing direct

drive guarantees excellent smoothness, precision

concentricity and minimum wear.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proxxon TG 125-E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info