Bedienungsanleitung Pulsar Apex XD38 (Seite 7 von 55) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

572608

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

10 11

џ Hold down the “MODE” (3) button to activate colour inversion mode

(functions “White hot” and “Black hot”). When function “White hot” is used,

warm objects are represented in shades of bright colour; “Black hot” renders

objects in shades of dark colour.

ZEROING

The sight features two zeroing methods - “one shot” zeroing and using

FREEZE function.

Zeroing should be done at operating temperatures, by following the order of

these steps:

One shot zeroing

џ Mount the rifle with the sight installed on a bench rest.

џ Set a target at a distance of about 100m.

џ Adjust the sight according to the instructions of Section 9 “OPERATION”.

џ Aim the firearm at the target using the mechanical sight.

џ Take a shot. If the point of impact does not match the aiming point, press the

controller (9) to enter menu M2 and rotate the controller to select option

“Zeroing” marked with icon.

џ Red auxiliary cross (C) appears in the centre of display. On the right of the

icon appear horizontal arrows and coordinated of the auxiliary cross .

џ Holding the reticle in the aiming point, by rotating

the controller (9) move the auxiliary cross (С)

horizontally or vertically relative to the reticle until

the auxiliary cross matches the point of impact (P)

(see pic.).

џ To switch between movement direction push the

controller (9) to hear a click. Vertical lines appear

next to the icon .

Note: the auxiliary cross moves only within the limiting frame (see pic.) that

defines its travel range: 200 clicks horizontally (+100/-100) and 200 clicks

vertically (+100/-100).

џ Exit submenu “Zeroing” with a long press of the controller button. Message

OK confirms successful operation. The reticle will now move to the point of

impact.

Attention! Do not turn off the sight before zeroing settings are saved,

otherwise your settings will be lost.

џ Take another shot - the point of impact should now match the aiming point.

џ The sight should now be zeroed-in for the specified distance.

Zeroing with “Freeze” function

џ Before using this function, please take a shot.

џ Select “Freeze” function in submenu M2.

џ Sight will prompt you to press any button on the sight or wireless control

within 30 seconds to freeze (memorize) the image. The status bar shows

corresponding icon.

џ Before pressing a button match the reticle of the sight with the aiming point

(as a rule - target centre). After button is pressed, the image “freezes” and a

limiting frame with an auxiliary cross appear. Rotating the controller, move

the auxiliary cross within the limiting frame until the cross matches the

point of impact.

Note. After the image freezes, you do not need to keep your weapon pointed

at the target.

џ Pressing the controller button allows you to switch direction of auxiliary

cross (horizontal or vertical). Long press of the controller button saves

zeroing settings and exits the menu.

џ Saving the settings is confirmed with “Ok” message displayed instead of

the coordinates.

џ After exiting the menu, the image returns to normal.

Note: zeroing parameters (coordinates X; Y) are saved in the sight's

memory as number 1 in the menu option “Weapon choice”. If you want to

zero in the sight using another weapon or another distance, select option 2 or

3 (details in the menu option “Weapon choice” section 12) and do the

zeroing.

OPERATING THE MENU

Long press of the controller – entering the menu.

Rotating the controller – menu navigation.

Short press of controller – entering menu option; selecting value in menu

option, exiting menu option or moving to the next parameter (clock mode).

Long press of controller – exiting menu option and menu (depending on

the cursor actual position). Automatic exit the menu takes place after more

than 10 seconds of inactivity (no navigation).

THE SIGHT HAS TWO MENUS

M1 – menu 1 (main menu);

М2 – menu 2 (additional menu);

Active submenu is highlighted with a frame . To switch to the other menu,

rotate the controller and move the cursor (the frame will be flashing), press

briefly the controller.

STATUS BAR

Status bar in the bottom part of the display shows information as follows:

1. Number of weapon choice (1,2,3):

2. Operation mode (“Rocks”,”Forest”,”Identification”):

3. Calibration modes - manual, semiautomatic and automatic:

4. 2x smooth digital zoom is on:

5. Image inversion is on:

6. Running time:

7. Battery charge level or connected external battery:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pulsar Apex XD38 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info