Bedienungsanleitung Quadra-Fire Classic Bay 1200 - Pellet

815525

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

13 04/217027-805J

O. Thermostat Controls

TEMPERATURE (HEAT / OFF) SWITCH:

Set this switch to Heat to control your appliance. The o󰀨

position will disable the appliance.

SET (MULTI- FUNCTION) SLIDE SWITCH:

This provides easy access to common settings, and should

always remain in RUN unless items are being adjusted.

Figure 13.1

NOTE: When thermostat is set to “Manual” non-

programmable mode, all positions of the SET slide switch

will act like RUN.

NOTE: Event or Period Quantity feature is not accessible

during Manual Non-Programmable mode.

NOTE: This delay does not happen when the thermostat

is manually turned up and down.

P. Thermostat Setup Options

Setup options for how the thermostat will function are

performed using a menu on the display screen.

TO ACCESS THE SETUP MENU:

Move the System Mode Switch into the OFF position,

and then hold down the COPY button for approximately 5

seconds until the screen changes. The menu will always

start with item #01, and is advanced to each following item

by a single press of the next button. The options for each

item are changed using the Up or Down buttons.

ITEM #01 (CLK = CLOCK FORMAT):

• 12Hr, default: This displays the clock times using

standard AM and PM values.

• 24Hr: This displays the clock times using the military-time

format (example 22:00 hours, without using AM or PM).

ITEM #02 (TMP = TEMPERATURE SCALE):

• F, default: Shows all temperature values in Fahrenheit.

• C: Shows all temperature values Celsius.

ITEM #03 (PROGRAMMING STYLE):

• 7 Day, default: This style uses a separate program

routine for each of the 7 days in the week.

• 5/2 Day: This style uses a weekday program routine

for Monday, Tuesday, Wednesday, Thursday, Friday,

and a separate weekend program routine for Saturday

and Sunday.

• Manual Non-Programmable: In this setting, there are

no program routines for the thermostat to follow and

the temperature control will be set only by the UP and

DOWN buttons on the front panel.

ITEM #04 (PERD = EVENT OR PERIOD QUANTITY):

• 4P, default: Thermostat uses four Events per day (called

morn, day, eve, and nite).

• 2P: The thermostat uses two Events per day (called day

and nite).

ITEM #07 (DLAY = DELAY TIME):

• 5, default: Thermostat waits 5 minutes before turning

the system back on after it was last run. This internal

delay prevents the appliance from turning on too quickly

after shutting down. The 5 minute setting is ne for most

applications.

• 2: Same operation as above but reduced to 2 minutes

between state changes.

UP / DOWN BUTTONS:

The up and down buttons are used to control the set

temperature, or adjust any other on-screen items. An items

ashing, is the item currently being adjusted.

HOLD BUTTON:

This button activates and deactivates the manual

Temperature Hold feature, which maintains a xed set

temperature indenitely without following a program routine.

COPY BUTTON:

This is used to copy temperature program items from one

day to the next. Also used to access the menu setup.

NEXT BUTTON:

This is used when setting items such as software options,

and temperature programs when they are ashing on the

screen. Pressing the next button will cycle through which

item is ashing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quadra-Fire Classic Bay 1200 - Pellet - Insert Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Quadra-Fire Classic Bay 1200 - Pellet - Insert

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info